Hammering - Page 2 - Recent Questions, Troubleshooting & Support
Why not the hammer is not working
The o-rings are most likely worn out. Take it to a service center and have them diagnose it. It probably needs a service kit installed.
Which type of oil for rok demolition hammer thank you
If an oil sight glass is in the modelrange of the brand ROK Rottela 40 , but if no sight glass is used in the model then often is to use special Grease lubrication. or only an special volume of oil and most used of them are zinc-free hydraulic based and included in the manual instructions of a maintenance set (service kit)wear parts set.
5/29/2019 9:53:04 AM •
Hammering
•
Answered
on May 29, 2019
I have the Endurance 300
If it's like mine, it probably won't charge. First time I let it run down, it was screwed, a real POS.
Chisel broken in chamber how to repair and get it out
A dangerous work wear safety glasses and a
leather apron because there could be metal pieces come off the parts , make first the part the disassembled toolholder hot with a large gas burner and in a bench vise with a hammer Interim anything like WD40 spray. sometimes it could be a long prolonged work if you have inserted an invalid chisel.
2/1/2019 10:37:10 AM •
Hilti TE...
•
Answered
on Feb 01, 2019
Not finding what you are looking for?