Electronics - Others - Popular Questions, Answers, Tips & Manuals


What Things to Consider Before Buying a Toner Cartridge?

If you are planning to buy a new toner cartridge, then you should always keep many different things in mind. You cannot just buy any cartridge without determining certain factors. There are many different kinds of toners that you can buy, such as cf283a and others.

These factors are essential for the proper functioning and longevity of the printer and the toner. The things that you should consider while buying a toner cartridge is as follows:

The Brand of the Toner
This is the first thing that you would have to keep in mind while buying a toner. The model and the brand of the toner are very important as it should match with the printer.
Moreover, it is never a wise decision to invest in cheap toners. You can buy cf283a or other HP toners which are popular in the market for their high performance. You should also use the same model of the toner continuously unless it is not working well. Keep the model number so that you can buy it when the toner finishes.

The Type of Toner
Different types of toners are present in the market, such as OEM, compatible, and remanufactured. There are also differences in the price of these cartridges. After you have chosen the model of the cartridge, choose the type of cartridge that would be effective for your printer.

The Page Yield of the Toner
This is a very important thing that you would have to consider. You would have to see the number of pages that the toner would be able to print. By determining this, you would be able to decide which toner you will buy for yourself.
These are some of the things that you should keep in mind when you are buying any toner such as the cf283a or any other model.

on Dec 11, 2019 | Electronics - Others


How to repair Motorolla Talkabout 250 antenna

I have just repaired four of these radios, with complete success.

You need a tube of black Stixall (currently £5.81 from Tool Station), a skeleton gun and a saucer of water with a good squirt of washing up liquid.

Take the back off the radio, take out the batteries and remove the rear cover by undoing the retaining screws using a screwdriver with a star shaped bit. Unscrew the circuit board now exposed using the same screwdriver bit. Remove the damaged rubber aerial with coiled copper core, being careful not to damage or distort the copper core. It lifts off one of the screw lugs revealed when removing the circuit board. Get rid of all of the old rubber.

Now put the end of the copper coil back over the lug (where it came from) and screw the PCB back on followed by the back of the unit.

Now form a new rubber cover to the copper aerial using Stixall, squirted into place. Squirt it down into the aerial housing so that it will get mechanical purchase from the body of the radio. Put on plenty, completely coating the copper aerial. Now dip your fingers in the saucer so that they don't bond to the Stixall and mold it into a smooth aerial shape. Leave it to cure for 24 hrs and then dust it with flour. Job done.

I have tested my repaired radios and they are great, the new "aerials" have lasted well. I am especially pleased that I don't have to throw them away.

Good luck - regards SJP

on Oct 16, 2019 | Electronics - Others

You can see on the manual.
If you have plan to have a diesel generator set, please refer to www.dieselgeneratortech.com

Inverter... | 23 views | 0 helpful votes

Google (wanderer)(rs232)(manual) without parens.

Solar... | 20 views | 0 helpful votes

Do you have a KEB Combivert? What model is it? Is your error .a prf or E.hybc or both? Hard to tell because you have posted 6 questions apparently.

Go to the KEB site, there are manuals and troubleshooting there, you will need to choose your correct model


From another Fixya answer:
If you are talking about error code 59 then the error is E.HybC.

E.HybC means that the feedback card on the inverter has been changed.

You must confirm the change at parameter ec.0 or ec.10. The inverter reads the value from the feedback card so all you have to do it hit enter to confirm the value.

If you have not changed the feedback card but the error continues to come back then there is a problem with the feedback card or the control card.

Inverter... | 42 views | 0 helpful votes

Do you have a question? If so, please Edit the question or make Additional Information with the make and model of the device, what you are trying to do, and what the symptom is.

Inverter... | 38 views | 0 helpful votes

Error. Over Current - Peak current exceeded
Possible causes:
Motor has a short - Phase to phase or phase to ground.
Motor cable damaged/defective.
Motor cables too long.
Acceleration/deceleration ramps too short.
Damaged output phase of inverter.

Electronics -... | 63 views | 0 helpful votes

Plenty here;

Electronics -... | 59 views | 0 helpful votes

Hi, if your phone support OTG usb, then you can directly use usb OTG. Directly connect your usb flash to your phone .
And trasfer all file / picture from your phone to flash usb using any explorer software install on your smarthphone. By default, you can access file manager on your phone to for transfer.

However, if your phone not support OTG, you maybe need to use any laptop / or pc to transfer file using wireless / wired.

For me , since i have network, i will connect my laptop and my phone to my network using wireless. Then, i will download from playstore , wireless sharing, where i can access directly from laptop to my phone storage. And start tranfer file once it connected.

Here the software that i have used.

Samsung... | 42 views | 0 helpful votes

The batteries are connected directly to the starting circuit of the inverter. If u don’t want it consume any power from the battery I would recommend an isolater switch between the battery and inverter.

Sunforce... | 67 views | 0 helpful votes

you meant this PPRH5 ???
its not a computer so moved you .
like all things , that use batteries,
check that battery terminals inside for corrosion
then load test the batteries.
so how old is it
when it last run ok.
or replace the batteries.
to charge the battery turn the inverter switch off page 6 in your manual.
if you don't know how test the batteries with a load tester
find a shop that can,
or buy new batteries, (test or buy , 2 choices)

Stanley Proto... | 77 views | 0 helpful votes

Select it on your desktop, right mouse click and change the name.

Kingston... | 70 views | 0 helpful votes

it means you can't write new files or alter the files.
It is cs26466 ?
this has a password protection feature apparently
is it an sd card ? move the tab on the side of it
If it is a usb flash drive I do not know how you get pass the passwor dor how you enter a password when accessing it ?

Electronics -... | 72 views | 0 helpful votes

Write protect in flashdrive could mean chip problem if you cannot partition or reformat the usb drive..you can try usb low level format, partition application..be sure to back up files before doing so.

Electronics -... | 79 views | 0 helpful votes

Unfortunately, from reviews I have seen on this product, it is likely it is not going to turn off. In other words, the Motomaster is junk. If I were you, I would return this and select another product.

The Dewalt DXAEPS2 may be worth looking into. It has a 2800 Peak/1400 amp Jumpstarter, a 1000 watt inverter and a 120 PSI compressor.

Sorry about the problems you'r having with your current Start pack.

Eliminator... | 107 views | 1 helpful votes

The LCD does not have the program to read the files so have the flash in a computer and change the file type. fore media you should select even one of the files and click on options then select restore to previous version the on the pop-up change the medai player where it says change with the icon on it. it will let you choose another media of your choice.

SanDisk... | 84 views | 0 helpful votes


2004 Honda Pilot Left Hand Window Controls.

Just sharing that if you change out the controller arm for the window raise and lower, and you are trying a test run of the new control arm before installation,

( No need for the speaker connection at this point).

If if you have one electrical plug not plugged back into where it came from, you will not get any action from the window motor control arm AT ALL !!!!!!

Hope this helps someone soon. Thanks goes to another user of this sight of open knowledge as he had mentioned it in a reply that I was able to read and add to I hope.

on Jul 06, 2019 | Electronics - Others

Red flashing means it is a non-rechargeable or incompatible battery. The charger is meant for NiMH batteries.

Try a friend's good Eneloop battery. If that flashes red, then the charger probably has a manufacturing defect.

Panasonic... | 539 views | 0 helpful votes

Not finding what you are looking for?
Electronics - Others Logo

16,321 questions posted

Ask a Question

Usually answered in minutes!

Top Electronics - Others Experts


Level 3 Expert

85222 Answers

Brad Brown

Level 3 Expert

18136 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Are you an Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides