Electronics - Others - Page 4 - Recent Questions, Troubleshooting & Support


Hi Mary, go to batteryspec.com. In the search box put in TR2.6-12 even though it's 2.6, it equates to 2.8 for our spotlights. The battery is around $20 with a 1 year warranty, and has the same specs (dimensions, terminal position) as ours.

Coleman LED... | Answered on Oct 09, 2019


The LCD does not have the program to read the files so have the flash in a computer and change the file type. fore media you should select even one of the files and click on options then select restore to previous version the on the pop-up change the medai player where it says change with the icon on it. it will let you choose another media of your choice.

SanDisk... | Answered on Oct 07, 2019


The batteries are connected directly to the starting circuit of the inverter. If u don’t want it consume any power from the battery I would recommend an isolater switch between the battery and inverter.

Sunforce... | Answered on Sep 30, 2019


I had the same problem with flashing red lights. Both sides on a four battery charger. I swapped the batteries to another charger and the batteries were fine. They charged normally. I put some different batteries in the charger and the same flashing light situation. Those batteries also charged normally in a different charger. I looked closely at the back of the charger and, low and behold, "made in China". Why does that not surprise me. The bottom line, it may not be a battery issue.

Duracell NiMH... | Answered on Sep 26, 2019


Select it on your desktop, right mouse click and change the name.

Kingston... | Answered on Sep 23, 2019


you meant this PPRH5 ???
its not a computer so moved you .
like all things , that use batteries,
check that battery terminals inside for corrosion
then load test the batteries.
so how old is it
when it last run ok.
or replace the batteries.
to charge the battery turn the inverter switch off page 6 in your manual.
if you don't know how test the batteries with a load tester
find a shop that can,
or buy new batteries, (test or buy , 2 choices)

Stanley Proto... | Answered on Sep 20, 2019


it means you can't write new files or alter the files.
It is cs26466 ?
this has a password protection feature apparently
is it an sd card ? move the tab on the side of it
If it is a usb flash drive I do not know how you get pass the passwor dor how you enter a password when accessing it ?

Electronics -... | Answered on Sep 20, 2019


Write protect in flashdrive could mean chip problem if you cannot partition or reformat the usb drive..you can try usb low level format, partition application..be sure to back up files before doing so.

Electronics -... | Answered on Sep 19, 2019


http://www.bestdrv.com/acer_6678_0we_driver_33319.htm this site will allow you to download and install the driver

Acer Electronics... | Answered on Sep 18, 2019


Maybe manualslib.com will have the PDF manual.

Inverter... | Answered on Sep 15, 2019


Unfortunately, from reviews I have seen on this product, it is likely it is not going to turn off. In other words, the Motomaster is junk. If I were you, I would return this and select another product.

The Dewalt DXAEPS2 may be worth looking into. It has a 2800 Peak/1400 amp Jumpstarter, a 1000 watt inverter and a 120 PSI compressor.

Sorry about the problems you'r having with your current Start pack.

Eliminator... | Answered on Sep 14, 2019


OLP or Over Load Protection means the device plugged into the inverter is over loading the the inverter please ensure the device you have plugged in is not rated to more than 2500w of power.

Cobra... | Answered on Sep 07, 2019


Hi Sir myself piyush gajera sir i was used my pen drive from winxp to another os version. afterwards it gives me an error that disk is write protected. i tried to remove or format but again it gives me prob that it is write protected and not able to format. i used different solutions but unable to format or remove write protected. please help me. how can i remove this write protection. sir my email id is piyush_gajera147@yahoo.com kindly mail me as soon as possible. my Pen Drive is transced d33193. and it has no any stick to remove write protected. Thanks in advance. i have the same error while deleting or formating my pen drive My transcend 4GB pen drive when deliting data it ask to remove the write protection while formating the disk it shows write protected. when copying data it ask to remove the write protect

PNY 2GB microSD... | Answered on Aug 13, 2019


When Ally starts chanting "I need my pack", it can become your worst nightmare. I can't find "the pack" but I'm guessing it's the keypad that you plug into her wrist. My bet is the pin/plug connectors in these dolls were not super awesome quality wise and sometimes didn't register they were connected (the program cards were a bit glitchy as well). Once the batteries need replacing, the doll needs to be reprogrammed hence the keypad connection request. Just a guess...

Electronics -... | Answered on Jul 26, 2019


I don't know how new these are, but there is one trick to try to recover a battery. Make sure it discharges completely(will not turn on at all, no matter how hard you try). Then charge it completely. Continue to discharge and recharge, (again, when discharging try again and again to turn it on till it will not come on at all).
This process should start to help the battery get back it's charging 'memory' and you should notice the battery last longer and longer with each charge. If this does not work, there is a problem with the battery. Good luck!

Electronics -... | Answered on Jul 14, 2019

Not finding what you are looking for?
Electronics - Others Logo

16,322 questions posted

Ask a Question

Usually answered in minutes!

Top Electronics - Others Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Ekse

Level 3 Expert

13434 Answers

Brad Brown

Level 3 Expert

18154 Answers

Are you an Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...