Drills - Answered Questions & Fixed Issues

try a local retailer or online store

Hilti Drills | Answered on Jan 20, 2020 | 17 views

brushless? or brush motor? could be the brushes are worn

Speed Drills | Answered on Jan 06, 2020 | 25 views

You need to know the hole diam. where the key goes and the max size for the chuck. 1/2 3/8 Grainger has your key when you know what to order.

Drills | Answered on Dec 30, 2019 | 210 views

broken shaft not many places would have this but a salvage yard

Drills | Answered on Dec 30, 2019 | 84 views

Found Ryobi P505 18v battery. Compare it to what you already have. Stores have other brands if this does not match. Was listed at The Home Depot.

Drills | Answered on Dec 30, 2019 | 79 views

lots of WD-40 double channel locks and strong person. work it a little at a time to avoid damage.

Drills | Answered on Dec 30, 2019 | 66 views

similar to mine so find out the thread going into the shaft and order either the 3/8 or 1/2 to suit your needs.

Craftsman Drills | Answered on Dec 30, 2019 | 65 views

it is possible that a chuck is spun on if it has fine threads. most likely if the chuck is frozen you would have to use spanner on key hole and put the outer ring in a vise. It should loosen up. Sometimes I use a pipe wrench and the large channel locks to spin the chuck open. Most have a screw but it can get rounded over which would require drilling it out.

Drills | Answered on Dec 30, 2019 | 66 views

Test the batteries with a multimeter that will tell you if the batteries are shot. You can do the same with the charger, test it with a multimeter but I don't recommend it unless you know what you are doing because you will be live testing it.
Ryobi belt sander https://toolinspector.com/best-belt-sander/

/uploadswith image

Craftsman Drills | Answered on Dec 22, 2019 | 53 views

Milwaukee would be a possible source.

Milwaukee Drills | Answered on Dec 13, 2019 | 40 views

This is indicating the battery is too hot to charge, usually after coming off the tool right after some hard work. During the charging process the battey heats up so if you charge a hot battery, thereby making it hotter, you shorten the lifespan of the battery considerably. If you are getting a hot/cold pack delay indication on the charger, it should automatically start charging once the battery has cooled down sufficently.

Dewalt DC920KA... | Answered on Dec 07, 2019 | 8,995 views

Not finding what you are looking for?
Drills Logo

Ask a Question

Usually answered in minutes!

Top Drills Experts


Level 3 Expert

85223 Answers

Brad Brown

Level 3 Expert

18157 Answers

john h

Level 3 Expert

22486 Answers

Are you a Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides