Cameras - Popular Questions, Answers, Tips & Manuals
Pictures are white after taking a shot. But when I'm in indoors it's quite normal.
Way, Way Over exposed Gracey. Read the manual for the mystery Nikon Camera and set the camera to Automatic Exposure. Film 'Speed' is measured in ASA Rating, 200 ASA would be standard for outside, 400 ASA for lower light, up to 1200 ASA for very low light like candle light. The higher the ASA Rating, the more grain you will get in an image. In the old days, we used a light meter set to the actual film speed of the roll of film in the camera and the sensor in the light meter told you what to to set the lens aperture and shutter speed to. Now with digital cameras, it is all automatic, or you can choose to go with manual exposure.FULL 'make model (what it is)' in all questions please first 3 words.GoogleNikon (model) manualRead it it LEAST 3 times and at least once with the camera in your lap. Use the camera every day for a week and read it again...
3/26/2024 1:37:56 PM •
Nikon Cameras
•
28 views • 1 helpful votes
Trying to find a manual for Ezonics Opus 4000
The earliest appearance I can find of this camera is in 2005. Newegg, a 3rd party dealer, once sold it purportedly with a manual. I do not find that manual on the web. In fact, I do not find Ezonics home page. The last contacts I have found for Ezonics is 48521 Warm Springs Blvd Ste 315, Fremont, California, 94539, United States. Phone Number (925) 960-9278. I have not confirmed this is yet a viable contact nor whether you can get a reply from
[email protected]. This particular camera is not the Amano camera you may encounter information about. You might find a contact or information on the forum of Photo.net. A few comments were offered by buyers at the Newegg site:
https://www.newegg.com/ezonics-opus-4000-ultra-compact/p/N82E16830109122. I suggest being doubious of sites which might claim to have access to the manual after you give them a lot of information. My multiple searches have not turned up the manual at this point. Sorry.
How do you turn on Digivue1.3? Has new batteries and used a while ago but pressing 2 button (Mode, Set) do nothing.
This is going to take patience and maybe the user guide. To turn on the Digivue 1.3, follow these steps:
Connect to Your PC:
Connect the standard USB cable (supplied) to a free USB socket on your PC.
The end of the USB cable should be connected to the socket on the back of the USB digidock.
Important: Do not connect any of the cabling provided with the Digivue before commencing the software installation.
Install DigiConnect Windows® Software:
Insert your Digivue into the docking station.
If you are connecting for the first time, a Red LED will display in the Activity Window of the Digivue.
Insert the CD provided into your optical disk drive. It will run automatically, and a dialog box will appear.
If the autorun feature is disabled on your system, browse to the disk using Windows® Explorer and double-click Setup.exe.
If you have a multilingual version of Digiconnect, you will be prompted for your language. Select from the list and click "Next."
Accept the terms in the License Agreement and proceed with the installation.
Choose the folder for software installation (default is the standard location for Windows® programs).
Click "Install" to begin the installation.
Leave the box labeled "Launch DigiConnect" ticked and click "Finish."
Wait for the Red LED:
Wait until a RED LED appears in the activity window of the Digivue.
You may now proceed with the next steps.
If you encounter any issues during this process, refer to the detailed instructions in the Digivue User Guide on page 9
4/1/2024 12:37:36 AM •
Cameras
•
20 views • 1 helpful votes
Hi, Have replaced batteries on model Gardenline brand model46715 garden timer and there is no digital screen showing on the timer. It is blank, like it needs new batteries.Can you please help me? Russ
Here are some steps you can take to diagnose and potentially resolve the problem:
Check Battery Polarity: Ensure that the batteries are inserted correctly, with the positive (+) and negative (-) terminals aligned properly. Sometimes a simple reversal of the batteries can cause display issues.
Reset the Timer: Some electronic devices benefit from a reset. Try removing the batteries, waiting for a minute, and then reinserting them. This action might reset the timer and bring the display back to life.
Inspect the Battery Compartment: Look for any signs of corrosion or dirt in the battery compartment. Clean it gently using a cotton swab or a soft cloth. Corrosion can disrupt the electrical connection and affect the display.
Test with Fresh Batteries: Even if the batteries are new, they might be defective. Try using a different set of fresh batteries to see if the display turns on.
Check for a Backlight or Contrast Setting: Some timers have adjustable backlight or contrast settings. If your model has this feature, try adjusting it to see if the display becomes visible.
Contact Customer Support: If none of the above steps work, consider reaching out to the manufacturer's customer support.
Remember that the Gardenline brand model 46715 has received mixed reviews, with some users reporting issues related to the LCD screen. While some have had positive experiences, others have encountered problems like fading screens or dead displays . If none of this works, you may need to explore another timer.
3/13/2024 1:26:13 AM •
Cameras
•
27 views • 1 helpful votes
Canon 12x36 is ii stabilization is not working properly. Stabilization
tends to want to stray.
Hello, I think dust, smudges, or fingerprints on the lenses can affect image quality and stabilization performance. Use a soft, lint-free cloth or lens cleaning solution to gently clean the lenses of your binoculars. Make sure not to apply excessive pressure or use abrasive materials that could scratch the lens surface. Moreover, when using image-stabilized binoculars, it's important to hold them steadily and avoid sudden movements. Rest your elbows on a stable surface or use a tripod if possible to minimize hand tremors. Ensure that you're using proper stabilization techniques to maximize the effectiveness of the stabilization feature.
2/29/2024 8:07:09 PM •
Canon Cameras
•
33 views • 0 helpful votes
Which is the best weding photographer in ernakulam
Here are some highly regarded wedding photographers in
Ernakulam, Kerala:
- Maks Wedding Photography:
- Located inChelad, Kothamangalam, Kerala.
- Specializes inwedding photography and videography.
- Contact:099478 23133.
- Facebook Page
- Lumiere Wedding Company:
- Based in Ernakulam, Kerala.
- Their crew beautifully captures emotions during the D-day, creating elegant pictures that will remain etched in your heart forever.
- They cover weddings not only in Ernakulam but also in UAE, Malaysia, and other parts of the globe.
- Contact:099951 48014.
- Website
- Euforia Wedding Photography:
- Located atUzhinjelil Tower, Convent Rd, Ponnurunni, Vyttila, Kochi, Kerala.
- Offers candid and artful wedding photography packages.
- Cherish the vibrant traditions and colors of your Kerala wedding with their skilled team.
- Contact:090481 90403.
- Website
- Dakshin Wedding Services:
- Exclusive wedding photography and videography company covering events across South India.
- Address:Js 5, 5th Floor, Heavenly Plaza, Kakkanad, Edappally, Civil Line Road, Ernakulam, Kerala.
- Contact:070123 90551.
- More Information
Remember to explore their portfolios, discuss your preferences, and find the photographer whose style resonates with your vision for capturing your special day! These companies use teams. It is difficult to pick out an individual photographer but perhaps you might find what you are looking for at the Lumiere Wedding Company. That company stands out among the four I mentioned.
3/15/2024 9:36:00 AM •
Cameras
•
24 views • 0 helpful votes
Not finding what you are looking for?
If your Megxon C480 camera asks to remove the lens cap but there isn't any, and the display remains black, it likely indicates a malfunction with the lens assembly or a sensor issue. Consider contacting Megxon customer support for troubleshooting or repair options.
