Plumbing - Page 2 - Recent Questions, Troubleshooting & Support

Can you tell us more about what you mean by Disable?

If you mean,how can you stop water from flowing, there are usually shutoff valves in the hot and cold water supply lines under your sink (nothing to do with the faucet itself).

Plumbing | Answered on Nov 18, 2019

It doesn't matter which side the holes are on. Most people put them to the back so they don't see the holes.

Mountain... | Answered on Nov 16, 2019

Need more information make of faucets so forth

Plumbing | Answered on Nov 14, 2019

You can try at here you can get all professional plumbing services at very reasonable price.

Plumbing | Answered on Nov 13, 2019

Download the BILT app and search for your faucet model. The icon is turquoise with a white nut ( as in nut and bolt).
It will show you step by step nearly everything under the sun. Hope that helps a bit.

American... | Answered on Nov 09, 2019

Its probbably the hose connected to the valve, try screwing it back on and turn the water up slowly, if that does not help, check your local radio shack

Maax Brio II... | Answered on Nov 06, 2019


Kohler Plumbing | Answered on Nov 06, 2019

First clean out your cabinets under the sink. Second turn turn the cold water valve off, hot water valve as well.
You should be able to locate the sprayer hose as it will have a weight on it, this helps to pull the sprayer back when you are finished with it. Remove the weight by lifting up on the tab should be on the center of the weight.
Then you should see the hose connection.There you should see a button.Push it in and give it a little tug. The hose should be disconnected. Just follow in reverse order to reinstall.
I hope this is information is helpful. Have a blessed day.

Moen Plumbing | Answered on Nov 06, 2019

Leaking from the stem or handle 90% of the time means all you need is a new cartridge or new O rings or seals, depending on the model of your faucet.
Phister has a warranty
and if they are like other faucet manufacturers with a similar warranty, just take the bad part(s) to your local authorized Pfister dealer and they will exchange them over the counter. Otherwise, you can contact Pfister through their website.

Plumbing | Answered on Oct 30, 2019

There are a lot of variables. Are you on a shallow well pump? It sounds like the well doesn't make much water. Check your well tank pressure. With 0 psi of water (drain the pressure) There should be 2 psi of air less than than the start up. If the pump is set to start at 30 psi, there should be 28 psi of air in the tank. It sounds to me like either the tank is shot, or the pump doesn't make much water. If you leave a faucet on while putting air in the tank and air comes out the faucet, then, the bladder is shot.

Plumbing | Answered on Oct 30, 2019

No, you cannot.

Plumbing | Answered on Oct 18, 2019

That pump doesn't have a pressure switch! It has a digital flow sensor on discharge. It will keep running so long as there is a flow. Usually caused by dripping tap, or leak. Pressure doesn't stop the pump. By the way - Don't expect to get parts from Canadian Tire or Mastercraft - They told me that they carry NO parts for that pump. It is very similar to a Burcam pump and they may have parts or offer service.

Plumbing | Answered on Oct 17, 2019

Plumbing | Answered on Oct 13, 2019

The vacuum breaker could be defective.

Delta Plumbing | Answered on Oct 12, 2019

You will get a better hold by heating the nipple with a lighter and then pushing the line on.

Jet Plumbing | Answered on Oct 10, 2019

Not finding what you are looking for?
Plumbing Logo

14,838 questions posted

Ask a Question

Usually answered in minutes!

Top Plumbing Experts

Brad Brown

Level 3 Expert

18157 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Gil Shultz

Level 3 Expert

3388 Answers

Are you a Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides