Blenders - Page 3 - Recent Questions, Troubleshooting & Support


Fixya does not sell Intertek parts. Intertek might be a source.

Blenders | Answered on Aug 25, 2019


Is probably a binding problem with the motor shaft bearing or the circuit card is fried. If you've tried giving it a good cleaning and that didn't work it's a good bet the unit is junk. Suggest buy a new one.

Blenders | Answered on Aug 17, 2019


Go on the Logik blender website and request parts info.

Blenders | Answered on Aug 17, 2019


Most small appliances cost more to repair than they are worth. Unless it needs a simple switch or a cord plug it's probably junk. Suggest buy a new device.

Blenders | Answered on Aug 17, 2019


The Hamilton Beach Wave Crusher 8 Speed Blender 1 EA58142 costs between $20-$70, depending on the website. For a complete list of websites that you can buy this blender at, check out this website: http://www.bing.com/shopping/hamilton-beach-hbc-wave-crusher-8-speed-blender-1-ea58142/where-to-buy/372C86187E5AE12B5006?q=hamilton+beach+hbc+wave+crusher+8+speed+blender+1+ea58142&FORM=CMSMWB

Hamilton Beach... | Answered on Jul 19, 2019


Talk to manufacturer they should be able to help.

Vitamix Blenders | Answered on Jul 17, 2019


Could you give more info? I have a Bamix with all the accessories so maybe able to help.:-)

Bamix Blenders | Answered on Jul 17, 2019


I have also had a beeping problem and it was caused by overfilling. I removed some of the liquid and it worked!

Cook's... | Answered on Jul 01, 2019


As stated earlier it could be the shaft needs lubing, remove the bottom part of the blender blade... the rubber thing that engages on the motor. I started with WD-40 and worked some lithium grease into it. Spins like new now.

Blenders | Answered on Jun 25, 2019


Most blender / mixers have one safety switch per jug.
If your BBL300 has one jug then it should have one small switch where the jug's locking tabs will lock the jug into position.
This is usually visible as a small plastic piece (may be black in color) just under an L-shaped groove on the base.
This is a "Normally-Open" switch, so that only something pressing the switch lever will switch it on.
No jug no work. You need jug.
You can test the spindle & motor by switching on (low speed) then use a flat plastic tool (eg a plastic spoon handle) to press this switch tab in.
If it starts, motor is good, then you can buy a jug to fit.

Breville... | Answered on Jun 22, 2019

Not finding what you are looking for?
Blenders Logo

6,208 questions posted

Ask a Question

Usually answered in minutes!

Top Blenders Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Ross Keen

Level 3 Expert

1364 Answers

Are you a Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...