Vehicle Parts & Accessories - Recent Questions, Troubleshooting & Support
What is the science behind lie detector tests? How do they work?
The supposed science behind polygraph tests is flawed, even proponents say it's only 90% accurate, (critics say it's far less at 70% or lower) so, at a minimum, for every 10 people that are tested 1 of them either gets accused of something they didn't do, or gets away with doing something. (or 3 out of 10 if you take a critic's side) And when it's done by Police, they are legally allowed to lie to you about your results!
Vehicle Parts &...
Viper 7856v remote is blinking after I start or lock my car. Whats happening
ALL of these answers are TOTAL GUESSES! The fact of the matter is that it could be 1 of 5-15 possible things. Anywhere from a shorted sensor to a simple remote reprogram. If you want it FIXED CORRECTLY. Simply take it to whoever installed it(or a dealer near you) and they will have it, not only, taken care of. But they'll probably also explain what happened and other possible problems/glitches & corresponding remedies for the future. Bottom line...you start pressing and holding buttons without actually knowing what you're doing, or what's wrong. You could just cause more significant problems! Like locking yourself out & having to disconnect it! You bought it...enjoy the benefits of "customer service". While it still exists!
on Nov 15, 2019
Tring to reset remote for viper 479vp
1. Place your key in your car's ignition and turn the key to "On" position.
2. Press and hold the "program" switch on your cars alarm.
3. Press any button on your car remote while you are holding the "Program" switch and release both buttons.
4. Press the "Program" switch on viper alarms transmitter once more and release it. Remove the key from the ignition and press a button on your Viper remote control to see if the programmers worked.
There is another way if this doesn't work, just let me know.
It's more complicated.
on Nov 03, 2019
Need operating manual for viper ce 0890
The asterisk button controls the remote starter feature. Press and release one time, wait. The parking lights should flash confirming that the unit received the command. If pressing the button one time doesn't work, try two times.
on Oct 25, 2019
Not finding what you are looking for?