Brizo Plumbing - Page 7 - Recent Questions, Troubleshooting & Support
Removing a stove pipe through the roof
I would begin by going up on the roof to see what the situation is because you are going to have to remove the stove pipe and repair the roof to assure no leaks. Usually the only thing holding the pipe is roof cement through a rubber boot. Use a razor blade knife to cut through the tar, then remove the boot by pulling the roofing nails that hold it in place. After that, patch the roof and reshingle. If this is more than you care to do yourself you will have to hire it done. good luck
1/29/2021 4:20:13 PM •
Plumbing
•
Answered
on Jan 29, 2021
Kohler DTV shower. Why is there erratic temperature control?
Run diagnostics.
Settings > System > Diagnostics
If no problem found, try System Reset.
Settings > System > Reset > Reset System > Cancel or Reset System
IMPORTANT!Resetting the system will return your interface to the original factory default settings. This will also delete any custom configurations or settings.
1/25/2021 1:03:12 PM •
Plumbing
•
Answered
on Jan 25, 2021
How can we get rid of the occasional sewer smell in our house?
When you next get the smell, check the traps to see if there is enough water in there to fill the trap, if one is less then it looks like water is getting sucked out when toilet is flushed or that trap (usually bath or shower) hasn't had water going in (lack of use) and water has partially evaporated.
12/22/2020 11:35:28 AM •
Plumbing
•
Answered
on Dec 22, 2020
How do you tighten a Cuisinart kitchen faucet
The handle and base of a kitchen fixture can work free after some time. A free fixture handle can meddle with the capacity of the spigot to turn on and off proficiently. Then again, a free base can move openly and cause the water lines providing the spigot to burst, causing a break. Fixing either of the two parts will incredibly diminish the aggravation related to a free kitchen spigot.
Eliminate any items in the sink bureau that meddle with your capacity to arrive at the two inventory valves situated at the rear of the bureau. Turn every valve clockwise to kill the stockpile of water to the fixture.
Inspect the fixture handle. You will either discover a setscrew with a recessed hex head at the handle base or beautiful covers snapped on the highest point of the handle or handles. You can also choose a
residential plumbing Edmonton to solve your problem.
12/11/2020 10:01:39 AM •
Plumbing
•
Answered
on Dec 11, 2020
How do I fix leaky faucet?
Sounds like your water supply lines under sink where they connect to faucet unit are loose oo they didn't apply plumbers putty under the faucet unit it self
12/10/2020 10:42:58 AM •
Plumbing
•
Answered
on Dec 10, 2020
Not finding what you are looking for?