Bosch Washing Machines - Page 6 - Recent Questions, Troubleshooting & Support


https://washingcodes.com/bosch-dishwasher-error-codes/
Try the above. They are listed as knowing your brand codes.

Bosch Washing... | Answered on Apr 16, 2019


What is a Bosch Max 800??

Bosch Washing... | Answered on Apr 14, 2019


Does the problem occur on both hot and cold washes. If not then check the inlet solenoid . If yes than check the board.

Bosch Nexxt 100... | Answered on Apr 07, 2019


chek if you have power by the on of button , if tere is power , chek transformer , if there is power on both sides , if motor have a capacitor , test it don,t get shocked ,u can test it with a meter , or it must be abel to make a spark, look for lose wires , chek if tere is belds on the motor and the drum ,chec if the pully on the motor axes is not lose , that the motor run but not the drum ,chec the power lead and the male plug that go to the wall , find the book let in dex for ansers lastly phone your electrical persone , but don ,t get shoked ! please hope it helped

Bosch Washing... | Answered on Apr 07, 2019


E00 usually requires a technician to reset, although you may manually do it by pressing and hold the start button for five seconds the "feature" should disable. E21 is blocked filter or excess of fabric in the filter over time. Turn the appliance off by the main supply, access the filter located on the bottom kick plate. Remove the filter and clean in hot soapy water, check the propeller for fabric debris. Run a hot wash without any clothing 70C or above with 1/4 cup white vinegar, you should do a maintenance wash at least every month and clean and remove the powder draw or detergent draw and inside every 2 weeks, clean the rubber door seal remove coins which are common and build up of debris
3_29_2019_7_41_45_am.jpeg

Bosch Washing... | Answered on Mar 29, 2019


turn the dial to the off position. Hold down both the delayed start and spin select buttons and turn dial to the left one click (cold position). you should then here the door unlatch. let go of the buttons. you will see some other codes p 01, p 02. turn dial to off. it should work fine after this. it worked for me. this should be in the manual.

Bosch WFVC6450UC... | Answered on Mar 25, 2019


1.while it was working it has high temprther with very hot water??
2.and now machine has stoping sotting tast only gining mathin sound?

Bosch Washing... | Answered on Mar 23, 2019


Traces of dark lines on the washer are caused by defective bearings and seals. they need to be changed.

Bosch WFE 2021... | Answered on Mar 17, 2019


Check the door lock switch

Bosch Washing... | Answered on Mar 14, 2019

Not finding what you are looking for?
Bosch Logo

7,532 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

jimorris77

Level 3 Expert

411 Answers

Dw Wooten
Dw Wooten

Level 2 Expert

227 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...