Blomberg Refrigerators - Page 7 - Recent Questions, Troubleshooting & Support

Likely the defrost timer/control is root cause and the overall fridge temperature is set too low in the attempt to compensate.

Have someone knowledgeable safely disable (disconnect) the defrost element and see if the over temp issue goes away. If it does, then 99% proven the defrost feature is root cause. It may take days to confirm and you'll likely have to adjust the fridge section temp higher from its current setting. So patience is paramount but you'll have your answer.

You could run forever without the defrost feature but then you'd have to manually defrost the freezer section every year or so, just FYI.

According to Hisense's refrigerator manuals, three beeps indicate an issue with the temperature control sensor. You should contact Hisense customer service for assistance.

Here are some troubleshooting steps you can try: Verify the unit is cooling properly. If the fan does not come on when the fan switch is pressed for several minutes, it may be faulty . If the lights are out inside a refrigeration unit, see Refrigerator or Freezer Light Switch Information .Sub Zero Interior Lights Turned Off ' How to Guide (subzero-wolf.com) Sub Zero Refrigerator or Freezer Fan Switch Information (subzero-wolf.com) If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair .

The ref. door switch may be at fault.
Flip the switch several times and see if the lights come on.
If so replace the switch.

Also if the grille on top is removeable check and see if the wires to the door switch are disconnected.

That white box is housing a timer and an overload protector. That orange dot isn't a button, it is the center shaft on the timer. If the timer is running it should be turning. Simplest thing to check is the thermostat.

• Unplug fridge
• Open fridge door.
• Thermostat is connected to the temperature dial.
• Remove the one screw about 2 inches behind the temp dial.
• Pull down that plastic cover
• Thermostat has a black, brown, and green wire.
• Disconnect black & brown, and connect them together. This bypasses the thermostat.
• Plug in the fridge. If the compressor turns on the problem is the thermostat
• I took mine out and sprayed it with electrical parts cleaner (can get it at an auto supply store). Don't know if it is fixed for good yet.
• If you want a new one, I found it at repairclinic.
• Repairclinic item #1550645. Manufacturer number 502407000304. In the picture you can see the number WPF5E, which is what I see on the one in my fridge. Price $38.15

Refrigerator Temperature Control Dial - What Do The ...

RemoveandReplace.com https://removeandreplace.com > ... > Electrical Mar 4, 2015 - Your refrigerator should be below 40 degrees F to be safe. The best temperature to suit just about any refrigerator is ideally at 37 degrees F.

Malcolm, if you are indeed getting an F20 fault, this is a problem with the flapper heater. The flapper heater current is low. First, Check the JST in-line connections for the flapper heater. Second, Check the resistance of the heater. If open circuit, replace the heater.

We love providing answers on mystery make / models!! :>D The defrost drain is blocked. Pull it out and look behind for a plastic tube and an s-trap just below the bottom of the freezer. https://www.google.com/search?q=GE+top+mount+freezer+refrigerator+is+leaking+water ..

Just had this issue - after checking all line connections, I pulled the ice maker feed water line from the back of the unit and found the tube was blocked with ice. Melted the ice with some hot water, and all is good once more. I would check for this before getting into the solinoid.

Usually the neck of the filter is not fully inserted, or they forgot to put the O-ring on it. 'make model (what it is)' in all questions please, first 3 words.

Try resetting it. Try cleaning and calibrating the screen. If such fails, you may have to consult a professional. https://icemakerguru.com/ottimo-ice-maker-troubleshooting/

limited info generic answer most likely defrost timer has failed -if you have to advance it to make unit work

It needs refrigerant gas, there isn't enough pressure to cool the whole refrigerant evaporator plate when the liquid gas vaporises to gaseous gas. You need a service call.

You can first start by checking the R134a gas to make sure it is good and the system is not low on gas and if the gas is good then you can check that the system is going is defrosting on time