Black & Decker Kitchen Appliances - Others - Recent Questions, Troubleshooting & Support

I just bought a new b2250 machine from Zellers for $59 dollars, they also have the b2000 for the same price. It's not worth your time to mess around trying to fix these things.

A new steamer basket for the Black & Decker HS900 is available in several different locations. Here are several possibilities: Website of Black and Decker: Look to see if Black & Decker sells replacement components for the HS900 steamer basket. Internet retailers: Check out sites like Amazon, eBay, and Walmart for replacement steamer baskets for the HS900. Appliance repair shops: Find out whether your neighborhood appliance repair shops carry replacement parts for the HS900. Search for Black & Decker approved service centers in your area and get in touch with them to see if they have replacement parts for the HS900. Make sure to read the specifications while looking for a new steamer basket to make sure it works with the HS900 model.

Hi, it might be best to ask for a replacement compatibility appointment from Black & Decker by calling 1 (800) 544-6986. That way they can send someone out to your hour to check where you've attempting to install the handle. Or you might be able to email them the photos for the replacement area for faster results. Thank you.

Hi Lyndseycoone:
Here is the recipe from the manual

3 cups of water (80 to 90 F)
3 tbsp butter or margarine, cut into pieces
1 tsp salt
3 tbsp dry milk powder
4 tbsp sugar
5 1/2 cups bread flour
1 1/4 tsp active dry or bread machine yeast

1. Measure ingredients into bread pan in the order listed
2. Insert bread pan into unit, close lid. Plug unit into wall outlet
3. Select Sandwich setting and appropriate loaf size (3 lb)
4. Press start button
5. The Complete Signal will sound when bread is done.
6. Using pot holders remove bread pan from the unit and carefully remove bread from pan and turn right side up. (Kneading blade may remain in bread. Remove blade when bread is cooled.
7. Allow bread to cool on wire rack until ready to serve at least 20 minutes.

Hope this helps...
Darlene

push the start/stop button until it beep (takes a few seconds before you her the beep) then choose the program you want. If that doesn't work unplug your machine and start over.

HHH on your breadmaker means the units it too hot to begin a new batch. Stop the machine, take out the bread pan and allow the unit to cool with the cover open.

Either the inner pan is not seated deep enough, or the bushing where the paddle comes through the pan has raised up a bit. Support - Parts for replacement parts on the Black and Decker website.

Deluxe Breadmaker - B2300 - BLACK+DECKER

www.blackanddecker.ca > products > kitchen > cooking

Enjoy the delicious taste of freshly baked breads with minimum effort. With 10 preprogrammed settings, you can easily prepare a nutritious loaf of bread or great ...

I have a copy of this Black and decker bread maker manual. Any information you require from this, I am happy to help with.

It is always better to go for 2:1 ratio. (water : rice) , this will help the rice to be silky and soft especially if you are using Basmati rice. For the other types, it is most generally better to go with 1:1. Also, it is better to soak rice for bout 30 minutes before cooking it, it will help in faster cooking saving some valuable electricity units.

Black & Decker is where I would look first followed by fleabay.

I had the same problem. Check the delay start button even though it doesn't tell you to. To get my machine to work the first time I used Menu #3 (which does not have a delay start) and it worked. Then I tried to use the dough cycle and it wouldn't go either, so I unplugged the machine, plugged it back in, went to Menu # 3 first to see the time (which was 1:50) then I checked the delay time to make sure it was also set at 1:50. Mine was not (it said 2:00) so I moved it down to 1:50 and it started 15 minutes later. I really don't like this 15 minute delay on this machine. I am going to try regular bread later and I will make sure that the delay time is the same as the time given for completing the loaf ( ie make sure it says 3:30 NOT 13:30. I hope this works.

NO, it;s better to wait until kneading has started. If it has a second kneading add then. If not, add in a few minutes after ingredients have started mixing. Just lift the lid and drop them in as it mixes.

Cheaper to buy a new waffle maker

There is a sealed bearing in the bottom of the bread pan. The paddle sits on the sealed bearing shaft. Over time the bearing begins to fail and the paddle does not turn freely or it may even freeze up. If you are sure everything is installed correctly this may be the problem. See if the paddle moves freely by hand and is not really loose. Sealed bearings can not be replaced. Eventually you will need a new bread pan. Sorry Hank

I have the exact same problem - still no solution - this is the only posting I could find ... anywhere! If I figure out something, I will let you know. I love the steamer, but the beeping is also driving me nuts!

Manualib.com has all the manuals that you can find and as long as your online 100% free. Just have your make and/or model number ready... you can find any manual even the ones that are hard to find. It also gives you the option to download, print, or even buy a copy of what ever your looking for... Hope this helped.....

black and decker site or online search --use model number

https://www.ebay.com/itm/231979174277?ul_noapp=true

Here is one site: https://www.breadmachinepartsfinder.com/node/826