Black & Decker Blenders - Recent Questions, Troubleshooting & Support

Unplug the blender. Use a baking soda and vinegar solution to clean the metal contacts on the bottom of the metal blender blade. (You will see a small circular inverted washer looking thing). Use the solution on the main blender unit also. (You will see a small circular metal piece in the center) Scrub them both with the solution and wipe. These seem to be some type of sensors. I then replugged the blender back in and it worked for me!! Good luck!

This worked for me - only took about 5 minutes (the amount of time it took for me to google Black & Decker and search through their FAQ)

Q. My blender stopped in the middle of blending. What happened?
A. Your blender has a motor overheat protection system that will automatically shut off the blender when it has been running too long with a heavy load. If this happens, unplug the blender and wait 10-15 minutes to allow the motor to cool down. Plug in the blender and resume blending.

Thankfully, I've chosen a blender with which I haven't had any problems yet. I read many reviews and ultimately decided to pick one from Cuisinart. I think it's one of the best hand blenders you can find.

B/d customer service

good move when one fails and it is a design problem don't buy another one or the manufacturer will keep on making the same rubbish

Sorry but this site doesn't sell parts or have anyway to assist you in finding them other than a internet search engine.

online at black and decker ,small appliance online store,ebay

mcdevito75 here, Best Bet, contact Black & Decker online or by phone for info, also see any appliance repair shop in your area.

Throw the Black/Decker away. I am going to. This is my second blender form them that has done the nonresponsive red light blinking thing. I figured that the first one was a lemon; however, it must be that Black/Decker is only concerned about meeting walmarts demands on price. Black & Decker's saying should be - Who needs quality when you can pay less the first time.

i had the same problem after only one month, took in back to walmart and they would do nothing. i love the big heavy glass jar on this model so i baught another on thinking i broke it some how and guess what, the second one stopped after one and a half months. called around and no one would do anything for me, company sucks, i took the bottom cover off the blender to expose the problem and there is a problem with the curcuit board and built in breaker. i ripped out all the speed buttons and curcuit board and just wired in a on/off switch to the motor. works great again. i still had a extra broken blender so i took a old chain saw i had and turned that one into a gas powered blender. problem solved, any questions please feel free to ask.

slide it over the blade ,, so that it sits between the blade base and the pitcher bottom