Amana Logo

Amana Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 1K Products
  • 75K Answers
  • 2M Views

The issue could be several thing,s but a couple of thoughts given the age of the dryer and home.
From a dryer standpoint sometimes the dryer drive motor fails by shorting out internally. The electrical short will cause the breaker the blow. If you are handy with a digital multimeter check for continuity across the motor.
From a home standpoint, the circuit breaker over time can wear out and trip early below the rated amperage. Since it is a gas dryer that is probably not the issue but check the wall outlet the dryer is plugged in to by testing another appliance with similar amperage draw.
Good luck with your troubleshooting!

Amana Dryers | Answered 17 hours ago


Hello Dennis;

My name is Peter. I am a retired field service technician.

You did not provide a model number. So, I am going to speak in general. It sounds like you have a bad or stuck contact switch. Or, you ice dispenser handle is broken and activating the dispenser.

You contact switch will look like the following:


25331098-tf0pl124dzd5m1czyqgpxhkh-4-0.jpg

There are two slots on the bottom of the dispenser frame for a flat head screw driver. Pop the bottom out. The rest of the frame is held by plastic tabs. Push in the sides to remove the frame.

Ground yourself by touching something that is steal. Static electricity will knock out a board. Remove the board. You will see the contact switch.

Send me the model number and I can be more specific.

Go into the following web site and put in your model number for diagrams and the part number.
Water Filters Lawn Garden Appliance Parts

Amana... | Answered on Jan 08, 2020


the question is can you get one???? chances are youll have to tear it completely apart

Amana Microwave... | Answered on Jan 02, 2020


no such thing

Amana Washing... | Answered on Dec 17, 2019


Take a look at this routing diagram.
Here is a video to walk you thru the process.

Amana NED7200TW... | Answered on Dec 15, 2019


Check the plastic drainage tray atop the coils at the bottom underneath. You probably will find a smelly stew waiting to be drained into the sink. Follow up by scrubbing the tray clean.

Amana... | Answered on Dec 02, 2019


You need to reinstall the software http://rollingskygame.com/run-3

Amana Heating &... | Answered on Dec 02, 2019


It's not fixed formula, but as per basic rule, easy method tocalculate for motor capacitor. (2650 X full load amps) divided by supply voltage(mentionedin capacitor)= MFD. (Plus or minus 10% to 15%) Ex: 1 Tr which gives full load amps of 6 amps (2650 X 6)=15900 divided by 240(VAC)volts=66.25MFD (10% to 15% plus or minus) You can fix 56.32 mfd or 76.18mfd So, you can go in between 56.32 mfd and 76.18 mfd. If you calculate of 440VAC capacitor, it will be 36 mfd. Hope, it will be helpful . Thanks.

Amana... | Answered on Nov 22, 2019


What is -the outside?
Heat pump, gas, electric heat combination?
You may need to back track, double check the Honeywell configuration jumper or software settings for your type of heating used.

Amana Heating &... | Answered on Nov 09, 2019


The model number is probably NTW4605EW0. Most appliance models from this manufacturer end with a number. Sears Parts Direct has the Use and Care manual for the NTW4605EW0 here: https://www.searspartsdirect.com/manual/sblu1hn6dz-001268/amana-ntw4605ew0-top-load-washer . Amana has addtional documents for the washer on their support page: https://owners.amana.com/user-manuals/ . Use the drop-down menu and search box to locate the manuals and installation guide. The current link to the manual (in English) is http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%20W10740545.pdf .

I hope this helps. I don't see a printed copy of the manual available from Sears Parts Direct. You can print it yourself or take the file to a print shop (Kinkos, UPS store) later.

Cindy Wells

Amana Washing... | Answered on Nov 05, 2019


if the lid lock is broke it shouldn't be doing anything.
If it is broke, it needs to ne fixed/replaced.
If it is doing other things, more troubleshooting is necessary.

Amana Washing... | Answered on Nov 03, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Amana Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Brad Brown

Level 3 Expert

18157 Answers

Are you an Amana Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...