Alcatel Computers & Internet - Answered Questions & Fixed Issues
My alcatel lucent is stuck on the initialisation mode where it keeps displaying **4029 v3.80.90**
Here are some steps you can try to resolve the issue:
Reset the phone: You can try resetting the phone to its factory settings. To do this, you need to press the "Menu" button, select "Settings," then "Phone Settings," and finally "Reset Settings." This should reset the phone to its default settings.
Update the firmware: If resetting the phone doesn't work, you can try updating the firmware. You can download the latest firmware from the Alcatel-Lucent website . Once you have downloaded the firmware, follow the instructions provided by Alcatel-Lucent to update your phone's firmware.
ALCATEL-LUCENT 4029 OPERATION MANUAL Pdf Download ' ManualsLib
If neither of these steps work, it might be best to contact Alcatel-Lucent customer support for further assistance.
10/28/2023 4:06:45 PM •
Alcatel...
•
Answered
on Oct 28, 2023
•
73 views
Cannot upload photo to pc
Please send your question in more details.
1) What device you are using to upload photo to the PC;
2) How is the device connected to your PC, by wired, or by wireless connection?
3) If by wired, the method of connection, i.e. direct connection without router, or connected via router; or via USB connection
4) what program is your device using to transfer the photos? e.g. wi-fi direct, blue-tooth transfer etc.,
5) how large is the size of your photo going to upload?
After getting all these information, then we can sort it out for you one by one the possible solution.
3/6/2022 11:31:25 AM •
Alcatel...
•
Answered
on Mar 06, 2022
•
82 views
My alcatel 5014c is gmail locked how to I get past it
Turn the device off, press the up volume and powerbutton in and don't release them until you feel the vibration of your phone.(mostly 5s)
You get in the recovery menu and you will be able to do a factory reset in this menu. You can scrol through this menu with the volume up and down and select with the power button.
Good luck.
1/17/2019 7:09:13 AM •
Alcatel...
•
Answered
on Jan 17, 2019
•
79 views
Alcatel 50561 is asking for SSID number and password how do I find them
Write down the Wi-Fi name (SSID) and Wi-Fi Password on the label inside the back cover of the device for use during setup. If the label is missing:
The default Wi-Fi name (SSID) will be "Alcatel LINKZONE + the last 4 digits of IMEI".
The default Wi-Fi password is the the last 8 digits of the device IMEI.
Make sure the battery and SIM card are inserted:
Insert the battery
Insert the SIM card
Hold the Power key for 3 seconds until all LED indicators illuminate in blue.
Connect your Wi-Fi device to your Mobile Hotspot.
On your computer or other Wi-Fi enabled device, search for available Wi-Fi networks and select network name (SSID) located on label on back panel of your mobile hotspot.
From a Windows PC:
Left-click Wireless Network Connection on the taskbar to view available networks.
Choose the SSID from the list of available networks.
From a Mac computer:
Select System Preferences -> Network -> Airport.
Click Advanced to choose SSID from the list of available networks.
Choose the SSID from the list of available networks.
From an iOS device:
Go to Settings -> Wi-Fi.
Choose the SSID from the available networks.
From an Android device:
Go to Settings -> Wi?Fi settings.
Choose the SSID from the available networks.
10/25/2018 2:14:29 AM •
Alcatel...
•
Answered
on Oct 25, 2018
•
54 views
Need Manual for percon
Hi,
Try this link
http://www.percon.com/Percon-PDF-product-manual.html
11/8/2017 12:28:52 AM •
Alcatel...
•
Answered
on Nov 08, 2017
•
79 views
Not finding what you are looking for?
