Questions & Answers for: Whirlpool duet water level

Question about Duet GHW9150P Front Load Washer

3 Answers

...water level on my Duet? Is there a way to increase the water level on my machine. Sorry there is no way to adjust the water level. the washer decides how much water by how much clothes are in the ...

Ad

Question about GHW9300 Duet Washer

1 Answer

Water level problem with duet GHW9300WHP water level does not seem correct in duet GHW9300WHP Washing Machine. When machine washes no water is visable, wash gets wet but no standing water . I seem to ...

Ad

...Water Level Seems Too Low We have a Whirlpool Duet GHW9400PL0 that now seems to have a too-low water level. My wife says that she thinks the water used to be several inches above the bottom of the ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...water level on a whirlpool front load Duet washer model GHW-9150 If the machine is underfilling, check the water level switch. This diaphragm like device has a small clear plastic tube attached ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...water level (never reached the door level) but developed nasty smell. My husband increased the water level by turning the level indicatior inside. We solved the smell problem but now the washer is ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...water level is correct. it never looks like its actually washing the clothes and the water doesnt even come up to the door, but maybe its not supposed to. The valve on your wall faucet shd be opened ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...water level to be more in washer can you ajust water level to be higher level in washer No. As with all modern machines your senses the size of the load and adjusts water levels accordingly. Unlike ...

Question about Duet GHW9150P Front Load Washer

1 Answer

water LEVEL SENSOR has failed and so there is no detection of the level selected on the washer. Hence the inlet valve is not cut off even after the water level has reached, You need to check this unit

Question about Duet GHW9150P Front Load Washer

1 Answer

...water level is to much If the water flows though the inlet then the flow pressure should be good, if not the inlet valve is bad or there is dirt in the filter. Also check the flow at the inlet of the ...

Question about GHW9150 Duet Washer

1 Answer

...water level sensor up in the electronics bank with a plastic tube that senses pressure as it fills. There is a small half inch screw in the center of it that is adjustable to set the water level on ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...