...water level other than the normal low/med/high on from - seems there should be an adjustment screw at the back but nothing mentioned / nothing found. Kenmore remove edge decore trims from left and ...
...water level. My washer had been working fine until just a few days ago. I had run a small load using the the small water level adjustment. Now it seems to be stuck there even though I have moved the ...
Question about 22422 Top Load Washer
...water level control switch.....thats great...but other than taping it to the front of the machine...i have no idea how to install it. is this a job for a repairman or is it a simple install? ...
...water level sensor operates off air tube from bottom of drum to control body, (bottom is not loose or there would be water all over the floor)) Blow any water out of the air tube, it should be empty ...
Question about 24 in. 16032 Built-in Dishwasher
...Water-level switch Water-inlet valve A defect in the water-inlet valve may mean that it's no longer able to shut off completely when the electricity has been turned off to it. If this occurs, the ...
Question about 24 in. 16032 Built-in Dishwasher
...Water-level switch Water-inlet valve A defect in the water-inlet valve may mean that it's no longer able to shut off completely when the electricity has been turned off to it. If this occurs, the ...
...water level selector, the water begins filling, but if i leave the water level selector alone, all i get is "agitator" turning for rinse cycle, then spin cycle, then "OFF". This sounds like a ...
water level switch is engaged. First try this : the water level switch is right behind the water level knob on the control panel. you will need to get access to inside the control panel and remove the
water level dont stop I bougth a new part and still have the same problem the water dont stop. put the washer on cold,start to fill washer, turn washer off if water still keeps filling you have a bad ...
Water-level switch A defect--or an obstruction--in the water-level switch may mean that it can't tell the water to shut off. So the machine overflows. This switch senses the water level in the clothes
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions