Questions & Answers for: water leak kenmore he2 washer

HE2 washer leaking water from bottom of door/seal during washing When washing heavier loads, the washer leaks quite a bit of water from the bottom of the front/load door and seal. If I press against ...

Ad

Question about HE2 Plus Front Load Washer

1 Answer

...washer, water is on Washer is leaking. If facing washer, water is on floor on left side and back, none on right side. It is hooked up on left side. It seems to be coming from under washer . . . ...

Ad

Question about HE2 Plus Front Load Washer

1 Answer

...water leaking from bottom - almost like a garden hose? any ideas remove panel on bottom usually three screws will remove panel then u can look inside to find leak.. check the drain pump for leaks or ...

Question about HE2 Plus Front Load Washer

0 Answer

Kenmore HE2 wahser leaks water from the front door Our Kenmore HE2 wahser leaks from just under the front door. The problem seems to be casued by a garmet that became caught/tangled in the door and ...

Question about HE2 Plus Front Load Washer

1 Answer

My Kenmore front load washer(HE2t) is leaking water from the bottom of the washer. tub gasket or loose bolts

Question about HE2 Plus Front Load Washer

1 Answer

...Kenmore HE2 Pluse Front Load Washer is leaking water out of the Detergant compartment like it is overflowing. sounds like the hose from the soap dispenser to the tub is blocked. might need the ...

Question about HE2 Plus Front Load Washer

1 Answer

water inlet? Next make sure that your hoses are not kinked. (There are some hoses that will seal themselves if they detect a leak, you may want to replace the hoses.) Remove the hoses from the back of

Question about HE2 Plus Front Load Washer

1 Answer

water leak while doing a load, there is enough water on the floor after to do another load, where is it leaking? it is probably coming out of the hose that goes into the pipe behind your washer.

Question about 43142 Front Load Washer

1 Answer

...initially and during rinse cycle I can see the leak underneath in the front. This is not leaking while water is in tank, only during the fill cycle. What is the model number of your unit?

Question about HE2 Plus Front Load Washer

1 Answer

...kenmore washer doesn't do anything. just beeps and turns on lights when any button is pressed. 1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets 1 ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...