...counter clockwise motion. I believe everything else is working perfect. The agitator has four small teflon (I believe) plastic grips inside the upper portion called "agitator dogs". They have small ...
washer it seems as if the agitator is slipping...it makes noise during cycle. used to be able to turn the agitator by hand and it would spin the plate in bottom of the turn either way i turned it. Now
Question about 24032\24036 Top Load Washer
...washer is over 20 years old, then it wont have a belt. the temperature of the water wont have anything to do with it spinning or not. need to know if it agitates or drains and just wont spin. if it ...
Question about 24032\24036 Top Load Washer
washer washes and wont spin clothes in either the wash or rinse cycle If you have little to no agitation (as well as spin), look for a broken motor coupling (connects motor to transmission). If the ...
washer worked but im thinking this is how this one is supposed to work. Please tell me if everything is working how it should be because I only have a 30 day warranty and would like to take it back if
Question about 24032\24036 Top Load Washer
spins excessively clockwise during agitating cycle causing clothes to wrap around the alternating rotating agitator. When the spin / drain cycle starts, wrapped clothes cause imbalance, then total off
...@ spin whe I turn the dial.I have heard if washer spins all right ,then it cannot be the lid switch. Is this true. if it wont agitate,then it's either your motor coupling,transmission,or ...
...washer fills with water. spins the cycle but the agitator wont move.. the top of the agitator spins with alot of torque but i can spin the agitator back and forth with my hands. must be worn out ...
...washer fills and starts to agitate, the clothes and water just spins clockwise. The clothes just end up wrapping around the agitator. The water makes like a wave that spins around. It is also make a ...
...washer started just spinning the agitator instead of agitating. If I run it with empty it works fine but with any load the agitator moves clockwise, stops when it is supposed to move the opposite ...
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions