Questions & Answers for: volvo 940 flywheel change

Question about 1995 940

2 Answers

volvo 940 running rough 940 non turbo running on first two cyls,spark ok replaced ing module,tune-up, had ecu checked ok.fuel injectors swapped no change what am I missing Have you checked compression

Ad

Question about 1995 940

1 Answer

...Volvo 940 flywheel How do I adjust the flywheel? I guess this has something to do with the timing. 1995 940 has a crank position sensor mounted at the top rear of the engine which reads cranks ...

Ad

...volvo 940. lambda-sond light stays on, on my K reg volvo 940. is it safe to drive? How do I fix it? well you have to change it and your car is not very envirmently friendly with the lambda sensor you ...

...volvo 940 altenator ? I have a volvo 940 his alternator works by intermitence I already changed his alternator but it steel has the same probleme how can you help me please? no there is not a fuse. ...

...volvo 940.Coolant keeps Just changed cylinder head on my '98 volvo 940 turbo 2.3litre.Coolant keeps running low (max-min in a day)with no visible leaks.What;s going on? hugo. If you have no leaks you ...

...volvo 940 turbo. Is this a difficult task? It looks easy for the 940 but I am not sure about the 940 turbo, as maybe some of the turbo parts are in the way. I'm not sure about that, since there is no ...

...Volvo 940 flywheel 1993 Volvo 940 Base with SOHC 2.3 4 Cylinder engine and Automatic OD Transmission. Engine cranks but won't start. Have already replaced High-pressure fuel pump/filter, ...

...volvo 940 brake lights don't work 1994 volvo 940 brake lights don't work check the fuse .and all of the bulbs are working.if ok then change the brake switch. There's a switch on the brake pedal ...

volvo 940 turbo wagon bulb monitor light up 1993 volvo 940 turbo wagon bulb monitor light up when on the brake and all three bulbs are working and new and all contacts were cleaned any advise???? bulb

...of crank sensor on 1991 volvo 940 se and do i need to get part from volvo dealership or would Lordco have it ? It should be at the rear of the engine block on top, right over the Flex

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...