Questions & Answers for: viewsonic projector overheating

Viewsonic PJ556d shuts down after 30-60 seconds Projector has 1800 hours on bulb. Unit will turn on for about 60 seconds and then shut down. Lamp light turns red and indicates an overheating issue. ...

...ViewSonic PJ750 the "lamp" and "temp" lights both flash red in unison. The unit seems to work at least for the few minutes it was left running, but I'm afraid to leave it on too long if it if truly ...

overheating, which could damage the projector. 1 Make sure the projector is cool and the power cord is unplugged before beginning. 2 Vacuum the air-filter. WARNING: Never operate the projector without

...ViewSonic projector was turned on to warm it up 10 minutes before a presentation. The presentation was to go 1.5 hours. At about an hour into the presentation, the ViewSonic PJD6531w Projector lamp ...

Our ViewSonic PJ558 is emitting yellow light. The whole display is in yellow already. Please help. If the yellow is perfectly uniform across the whole screen, then a processor problem may be present. ...

...projector. The overheating can malfunction the functioning of some sensors, ICs which can cause a problem like loss of colour. The projector gets over heated due to two problems. 1) The air filters ...

...viewsonic pjd5111 when plugged in and try to turn on both the temp and lamp light glow orange, the projector tries to come on I can hear the fans come on but the projector lamp does not come on, just ...

...Viewsonic projector shuts down after 10minutes? Hi! I think it is the time to remove the cover and check for air filters blocked with dust. When this happens, air doesn't flow freely through the ...

viewsonic projector shut down and power button blinking I change to new bulb and plug power does not come on,the power button starts to blink It may be clogged with dust which in turn causes ...

...viewsonic pjd5134 projector turns itself off in very few minutes.How to solve this problem? www.manualslib.com/manual/430774/Viewsonic-Pjd5132.html?page=61#manual Follow this link and be informed ...