Questions & Answers for: viewsonic projector lamp light flashing

...projector; loaded software, registered, connected VGA cable to unit, then to laptop; connected power cord to unit, then to laptop; power light flashing yellow, held for 2 seconds, flashed green for ...

lamp won't come on Powers on green but then goes into the amber flashing mode both for Source and Power lights. It's been working great until now. Hi Check the cables, try taking out lamp and put it ...

...ViewSonic PJ500 and I thought the bulb had blown even though it wasn't that old. I bought a new bulb and put it in and still keeps going from green to flashing red power and lamp lights. Any info ...

...ViewSonic PJ750 the "lamp" and "temp" lights both flash red in unison. The unit seems to work at least for the few minutes it was left running, but I'm afraid to leave it on too long if it if truly ...

ViewSonic LiteBird PJ875 I have a LiteBird PJ875 and when I turn on the unit the Power/Sandby light just keeps flashing and the lamp does not turn on so I replaced but the lamp still not turning on. ...

...projector that won't emit light. The green indicator flashes when pressed for about 1 minute, then goes back to orange. The red bulb light comes on after about one minute. There is no sign of heating ...

wont turn on just flashing blue light there are 2 reasons for it 1, defective lamp 2,the fans is defective

...projector parts: lamp, bulb, Lcd panel, Lens, DMD chip,color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry China Lampdeng Limited Tel: +86 131788 67858 E-mail: ...

...flashes and two orange lights are on that says temp and lamp? You need to let the projector cool down after turning it off before you turn it back on again. Wait 10 minutes, then it should turn on

in the lamp ballast itself. The projector will probably need to be sent for service. If you have a spare lamp, that would be the first thing to try. However, if it isn't that, it is likely the ballast