Questions & Answers for: Chevrolet Cavalier v6 engine

and remove the belt. Use a 15mm socket on the 4-cyl. engines and a 3 / 4 in. open end wrench on the V6 engines

...V6 cooling fan will not come on at all. I test the fan(good), I tested the cooling fan relay it good, now I'm loss. since you have already tested fan and relay and both work, the problem may be the ...

engine swopping Will my chevy 4.3L V6 fit in my 2.2L inline 4 1990 cavalier? the V6 comes from a 1992 S10 tahoe 4x4 I can't give you direct knowledge, from having personally done this swap before, but

v6 galant and it will not start.i have replaced the distrabutor and the angle sensor.Plus the fuel pump and the filters.After doing that the engine started and ran for about 15 seconds and cut off.now

...V6 engine. I just I have a 1994 Cavalier, 3.1L V6 engine. I just put a rebuilt alternator and new battery in it, and the battery light is still on while the engine is running. I think that the relay ...

How are firing order for cavalier 1994 V6 2.8L? Thank You CAVALIER IS 1,2,3,4,5,6, THE COIL PACKS ARE 1-4 6-3 2-5 2.8L Engine - Engine firing order: 1-2-3-4-5-6 Distributor Rotation: Clockwise

...V6 engine and most 1987-94 engines use a single (serpentine belt) to drive all engine accessories. The serpentine belt driven accessories are rigidly mounted with belt tension maintained by a spring ...

...engine are you supposed to change the oil more around 3,000 miles? I have a V6 now and wait up until 4,000-4,500 miles between changes. Is it still okay to do that with a four? I would refer to your ...

torque for water pump bolts For the four cylinder engines - 18 Ft-lbs For the V6 engine - 89 in-lbs

where on the chevrolet cavalier 1994, v6 convertibles are the engine numbers located? The engine code can be found on your VIN# you won't find anything of value on the engine it's self