Question about Protron PLTV-32 32 in. Plasma Television
tv has no sound or picture it has a grey screen i tried to use a lcd tv i purchased from a friend and when i plugged it up all i got was a blank screen and no sound You should try to use the Component
picture no sound Let verify first to narrow down to where the problem can be. First, check the on screen sound set up menu to make sure the speakers are not set to OFF. If the setting is OK, then ...
sound and manufacturers logo show on tv screen when powered up however no picture. The inverter may have gone out. If the display is momentary such as for the logo, the inverter cannot hold the high ...
spetroniq 42"lcd screens black no picture no spetroniq 42"lcd screens black no picture no sounds red light on front still alternate to green when ready but no picture. Sounds like maybe power ...
TV on. It has power, but I have no picture. I can hear the sound from each channel, but that is it. I can change the different sources using the remote control and when I come back to TV, the picture
Question about PLTV3250 32 in. LCD TV
...sound just nothing HelloOpen your TV and check the protection fuse inside [on the power regulator board] is blown up or not. If blown up, repalce it with same type and ampearage. The ...
Question about PLTV-42HW68 42 in. LCD TV
...SOUND BUT NO PICTURE, TURN SET OFF FOR 10 SECONDS SET COMES BACK ON AND PLAYS ALL DAY have you checked the capacitors check them on the power board look for a none flat top if any look like the tops ...
Question about PLTV-42HW68 42 in. LCD TV
TV have sound but no picture. When I turned on my TV got sound but no picture at all, if I tap on the screen the picture comes visible. In about 30min the colors turned very bright and then the screen
tv panel. It came on picture and sound was fine. Within 10 minutes, everything stopped, went blue. I did the same today, same thing happened. It will not stay on. Any solutions? sounds like it is over
Question about PLTV-42HW68 42 in. LCD TV
...sound but doesn't show the picture but says it is receiving no signal basically it is input issue Brent, you may want to turn off and on your tv after 4-5 minutes, if same thing press on your tv ...
Usually answered in minutes!
74 Questions
37 Questions
26 Questions
26 Questions
16 Questions