...tube you will see the crt board ,look for R56 and he should measure 51 ohms and its color code is blue/brown/black and is 1/2 watt,it needs to be replaced with an exact replacement.You dont need to ...
9P5511 C102 I was cleaning the inside of the cabinet (mirror and tubes), just wiping them down with a clean dry cloth. I also wiped off the backside of the magnifier screen also. Everything is nice ...
Question about 60PP9202 60" Rear Projection HDTV-Ready Television
brown color. Is the projection tube going? If so estimated cost? Is it worth fixing or should I purchase another TV. Yes, worth fixing, sounds like convergence is out on the tip ends. Check papers for
Question about 60P8342 60" Rear Projection Television
...default - nothing worked. I called a service company and they said I would have to buy 3 color tubes @ $222. each plus a $250. service charge...so, over $900 to fix. What do you think.....should ...
...tube (CTR) or loose connections. Replace two Ic's Stk 392-110, and get in service menu settings , and adjust point by point. After replaced stk IC's, check if any resistor look brown or born, if yes, ...
Question about 43P8341 43" Rear Projection Television
...halo on upper and lower left corners This set needs a fluid change. Between the face of the picture tubes and projection lens there is a layer of coolant fluid. The fluid has turned a milky brown ...
Question about 43P8341 43" Rear Projection Television
...tube face and the projection lens. The coolant starts turning a milky brown color and causes the picture coming through it to be degraded. This envolves removing the picture tubes and changing the ...
Question about Magnavox 9P6034C 60" Rear Projection Television
and where can i have it done at? Your fluid, known as Ethylene Glycol needs replaced in the picture tubes. Normally just the green and blue need done. This is what keeps the face of the tubes cool and
Question about 60PP9202 60" Rear Projection HDTV-Ready Television
...and so forth and nothing seems to fix it. What can I do? Your problem is the fluid in the 3 picture tubes needs to be replaced. All the older projection sets used this type of cooling for the tubes. ...
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions