Questions & Answers for: trunk lock replacement

trunk lock above the trunk lid tself - sometimes looses coiling retention for the lock to work properly, which in effect does not properly lock wrap around the pull down electronic unit located in the

Ad

...trunk doesn't lock the hood How to fix or replace the trunk hood latch ? The trunk key works, but the trunk hood doesn't lock when I close it. I had to reinstall the loose mounting hardware for the ...

Ad

Question about 1991 7 Series

1 Answer

...trunk, lock smith open vehicle door but can't open trunk because of double lock system, what can I do? break the lock and replace or try removing the back seat to gain entrance to the trunk and ...

...trunk.Solved by drilling 1 inch circular cutout (series of small drill holes) behind number plate above lock. Lock operating bar then visible. Lock released using long nosed plyers. Note.. release ...

Question about 1995 XJ6

1 Answer

...trunk lock out with a dent puller and replace the trunk lock.there is a lock clip that holds the lock in the trunk lid that you may have to replace as well.the new trunk lock can be keyed to your ...

trunk on 2002 Camry. Lock will not turn with master key. Remote trunk opener will open trunk. 1. Open trunk 2. Place latch in lock position 3. Pull inside trunk release to see what isn't moving 4.

Question about 1992 Lumina

1 Answer

...trunk lock quit working with a key. I removed the back seat to access and open the trunk by removing the two bolts fastening the trunk lock to the body of the trunk.. The opening is so small I cannot ...

Question about 1992 Lumina

1 Answer

...the locking latch on the trunk,after you have detached the button,and if it stays locked,you then know that it was the switch,failing that,replace the lock assembly on trunk.cheers,,hope this

...trunk lock? It's the correct key, its stuck in the unlocked position in the trunk lock and the trunk won't open, the lock won't turn to remove the key. inside the lock is too dry ,rusty, just moving ...

Trunk lock cylinder. removing and replacing trunk Lock cylinder Most trunk locks have a holding mechanism at the bottom edge of the trunk lid. Open lid, look at bottom edge. If you see a plate held in

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...