Question about 1999 Ram 2500 4WD
putting in new head gaskets, need all of the specs, timing , torque for heads, intake, exhaust, firing order, and timing specs. Thank you I googled the specs and i found mine it will give numbers and ...
I need the torque specs for the 4 hus assy bolts and the 2 caliper bracket bolts on a 2004 dodge 2500 4wd...do you have them? Caliper Bolts Torque ...... 24 ft. lbs Hub/Bearing Bolt ........... 122 ft
what are the torque specs for the rear caliper bolts on a 2006 ram 2500 diesel? the caliper bolt torque is 22 ft. lbs. thanks and come again
i need torque specs for a 2004 dodge cummins 24 valve, need head bolt torque and sequence, and rod bolt torque http://www.dieseltruckresource.com/dev/index.php I suggest this website for your dodge ...
Need torque specs for track bar 2002 Dodge Ram 2500 4x4 Hi Track bar bolts are 85 fp
i need torque specs on rockers and lifters for a 2005 dodge ram 2500 5.9 24 valve diesel engine Lubricate the crossheads and push rod sockets and install the rocker arms and pedestals in their ...
i need the touque specs for the outer front axle nut on a 2005 dodge ram 2500 4x4 HUB AND BEARING ASSEMBLY NUTS TORQUE TO 125 FT LBS THE HALF SHAFT AXLE TORQUE TO 185 FT LBS.
...torque spec. as in how tight the nut is. The amount of torque is measured in bearing preload. You will need a "torque to rotate" torque wrench. If you are using new bearings the torque spec. is 15-25 ...
...torque spec. on which of the bolts or nuts. I really don't know until you tell me.. example: Head bolt, exhaust manifold bolts, injector pump. There a way to make sure that you have the correct ...
Question about 2008 Ram 2500
2008 dodge ram 2500 diesel 4x4 upper and lower ball joint torque specs Big A-- there are specs for the ball joint stud nuts!! You're the exact reason I don't take mine to dealerships!!! Do my own work
Usually answered in minutes!
129 Questions
753 Questions
645 Questions
435 Questions
336 Questions