...THAT LEADS TO THE THROTTLE BODY AND CLEANING THE THROTTLE BODY AND THROTTLE PLATE. USING AN OLD TOOTHBRUSH AND A CAN OF CARB AND CHOKE SPRAY, SCRUB IT, WHILE WIPING OFF THE CARBON WITH A CLEAN ...
...or idling issues at low speeds. So cleaning it is pretty easy and cheap. You can use an old toothbrush and dip it in some gas or use aerosol throttle body cleaner. When you've loosened up the ...
...think the code was p1081 but not exactly sure.I cleaned the throttle body with spray cleaner and a toothbrush and added a can of SeaFoam to the fuel tank. These are not helping. A totally new exhast ...
...throtle by hand and look for carbon/grease/soot etc were the throttle sits when closed. clean with toothbrush and some caeb cleaner get all black off and dont forget the blade, both sides and the ...
How to clean the throttle plate Ude carb cleaner and a old toothbrush
... Valve well, first of all remove from vehicle. most iac have 2 torx screws to remove it. use an old toothbrush or similar to clean it. do not put body of iac in any liquid or it will ruin it. just ...
...checked for black thick soot,all over the plate n housing. if so needs to b wiped clean with a rag, toothbrush an carb cleaner to remove black film covering plate an hsg.very common probem with ...
How to clean ground leads Toothbrush, baking soda, water- make a baking soda paste put it on the toothbrush and brush away rinse clean--great job!--Good Luck.
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions
