toner cartridge has a .05 Amps fuse in it. This gets blowed when you switch on the machine.This is used to reset the page counter and also to inform the machine that you have inserted a new toner. Now
...fuse no problem, there are 2 possibility broken : M9 (bottle toner motor) and M10 (toner stirring motor), the toner motor not rotate when first machine on, the machine quiet. You can see or hear ...
Question about WorkCentre PE16 All-In-One Laser Printer
...toner cartridge. That is the way the machine knows you have inserted a new cartridge, it momentairly sees a short, and bloes the fuse resetting the toner cartidge count. Where is the waste toner box
toner the fuse blows and resets the toner counter/light. Sometimes it blows and fails to reset. If you can solider you can replace the fuse and try again. Otherwise you will have to exchange the toner
...Fuse error ? Check the TONER Cartridge and Reinstall it CRU Fuse Error Means : The toner cartridge is not installed correctly You can set the machine to ignore the ?[Toner Empty]? message and to ...
...toner cartridge. You need to replace the fuse located on the inboard lead edge of the cartridge. This will reset the internal counter as the fuse opens. I forget the mill-amp rating of the fuse but ...
...toner soon" you have blown the fuse in the new cartridge, now the machine has run about another 100 copies and says "replace toner"....but you now can't reset the light because the fuse is already ...
Question about SCX 4521F All-In-One Laser Printer
...fuse for toner cartridge (25mm, 250V/ 0,063A or 0,1A and maximum 0,125A) When you pull out toner cartridge you will see the glass fuse on the front left side of the cartridge. The new fuse will reset ...
Question about SCX 4521F All-In-One Laser Printer
my samsung clp-325 is displaying door open on my computer and having the red light on take the toner waste unit out and all cartridges, then take the fusing unit out . turn it to the side and shake ...
Question about SCX 4521F All-In-One Laser Printer
toner contains a little fuse (it is under two tiny contacts). When the user put the new toner into the printer, the fuse blows and the printer detects in this way that it has a new toner in; so if the
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions