...4 cylinder hi the sensor is in with the timing belt. You will have to remove the timing belt cover and belt to put a new one in. You will also see a small gold metal rotor that spins on this sensor ...
...cylinder head and timing belt on 2004 santa fe 2.4L How long should it take for labor hours? What is the usual labor rate? How much in parts? Need total estimate. For a pro, about 4-6 hours. For a ...
...4-cylinder. Hi: All of the engines in Hyundai santa fe are interference engines, so you should regularly change your timing belt. The timing belt also drives the water pump, so it is always a good ...
...the model as a Santa Fe with a 2.0 td...The Santa Fe does not have a 2.0L engine...It has a 2.4L (4 cylinder) or a 2.7L (6 cylinder)...Please tell me which engine is in the Santa Fe... ...
...4 cylinder engine had timing belt and balance shaft belt replaced after balance shaft belt broke now engine pigs alot and doesnt have any power cuts out above 3000 rpms its out of time should be ...
4 cylinder, and two different V6 engines - i.e. 2.4L 4 cylinder, the 2.7L V6 and the 3.5L V6. The crankshaft position sensor on the 4 cylinder and the 3.5L V6 are in the same place - Front Crank Shaft
...4 cylinder engine (2.4 Lit I4), that's DEFINITLY a risk. Get the belt inspected! The 2.4 lit 4 cylinder is notorious for belt failure (even before 60,000 miles due to the heat generated by the ...
Question about 2003 Santa Fe
...broke on 2003 hyundai santa fe 4 cylinder. is the engine non interference type if the/ timing belt breaks does cause engine damage o 2003 santa fe 4 cylinder engine Yes it has an interference ...
Question about 2002 Santa Fe
...4 cylinder keeps misfiring. Each time it is put on the computer it gives different codes for different spark plug misfires. We find the spark plugs and coil pack. It still hes Changing coil pack, ...
Question about 2002 Santa Fe
...Santa fe 2.4 L engine. Why is there 10 lb compression in 1 and 4 cylinders,and 0 in 2,3 cylinders? No problems found with timing belt and timing, no problems with balance shaft. possible reasons 1--- ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions