Questions & Answers for: test mixer control board

...mixer will run on stir speed only. The electronic speed control board on this machine was replaced with a new one. When tested, it only runs on stir speed at any speed setting. check to see if magnet ...

...test ok. white on lower right hand side shows nothing on meter. It sounds like you need a new speed control phase board: ...

...test for either part. Take the machine apart and look at the board where the control know is mounted to see if there is anything obviously cracked or broken. If the mixer was ever dropped on its side ...

...mixer) I changed the worm gear but I broke the control plate when I was replacing the worm gear So, I bought the part and changed it, but the mixer wont start I tried to removed the brushes but I ...

...mixer 5kpm stopped working. How do I test the phase control board to see if this is the problem. I am sorry to say but only with a new one, about 30 bucks and five minutes of work, but if your mixer ...

...test the speed control phase board to see if it is shorted. With the line cord disconnected, pull the t-b ar contacts to open, and insert a piece of paper between them so they cannot close. Reapply ...

test the mixer, see if this will slow the mixer down, so it regains the other speeds. If this adjustment does not work, then the problem will be the phase control board, that is part number W10325124,

how to test phase board. thx no souns See: http://www.electronicspoint.com/threads/kitchenaid-mixer-phase-control-board-problem.241021/ http://howtomendit.com/answers.php?id=94960

Mixer is not turning on. Control board? I recently took apart my Kitchen Aid and put it back together. It will not turn on now. I took out the carbon brushes, the phase and control boards, and pretty ...

...mixer. While the motor works as you have stated, you might wish to test the motor's stator, and if that is all right, test the armature. There is plenty of information on armature testing on line. ...