Questions & Answers for: Toyota Celica how can you tell if your fuel pump is bad

...fuel pump shat its self and bad news its located in the tank im sure i dropped the tank down to get to it but pull up the carpet in the back n check 4 an inspection plate... take a fuel line off the ...

...fuel pump Lots of possibilities, but if you mean that the engine simply stopped while driving, the most likely culpret is the timing belt snapped. I have had that happen twice with two different 86 ...

fuel pump fuse might have something to do with it Check fuses. If fuses OK, check to see if there is spark. If there is spark, have a helper crank the engine while you hit the gas tank with your fist.

...fuel pump, maybe the fuel filter? tricky one. not a vapor lock as this typically isn't a problem on fuel injected cars. Maybe the ignition module overheating or could be the fuel pump in the first ...

...pump fuel CHECK FUEL PUMP FUSE AND RELAY.IF BOTH CHECK OUT OKAY.FUEL PUMP BAD.ALSO SCAN CAR TO BE SURE THE PCM NOT FAULTY.IF YOU GOT A MECHANICAL FUEL PUMP.IT MORE LIKELY BAD IF IT DONT PUMP ANY ...

...fuel pump cycling. Wuold a bad fuel filter keep my Celica from running? would have to be pretty bad for a fuel filter to keep a car from running, but it is possible-check fuel pressure at the fuel ...

...fuel pump is in the gas tank. It is mounted on an assembly which is also the sending unit (the float is on there to tell you how much gas you have). The picture of the pump is what your pump looks ...

the fuel pump then check all fuses first and then try swapping the fuelpump relay with another relay with the same numbers to make sure the relays are the same. start with these things first. good day

...check that first. I do not believe it is your ignition module. Your owners manual should tell you where these are. This will at least help you get started to make sure you are getting fuel. Thanks ...

...tell if the fuel pump relay has when bad. just put a new fuel pump and it still not wanting to crank OPEN THE AFM COVER SHORT PIN 1 AND 2. THIS IS THE PUMP SWITCH. TURN IGNITION KEY TO RUN POSITION. ...