...forcing water out of the tub, agitator turns counter clockwise. machine very quiet. fault may be tacho on motor fallen off or round magnet that turns inside the tacho coil has become unscrewed. ...
Question about Axxis WFL 2060 Front Load Washer
...i nassume you mean that motor accerates to an uncontrolled speed. check the motor tacho - mounted at the opposite end to the pulley. tacho consists of a circular magnet surrounded
Question about Axxis WFL 2060 Front Load Washer
...and means replacing the unit. the only other possibility , is if the motor has a thing called the tacho magnet,this is to be found on the end of the motor away from the drive pully. What you are ...
...see this error if the carbon brushes or the motor fails. This error code can be generated by no tacho reading from the motor (the electronics cannot see the tach generator of the motor), a triac ...
Question about Logixx WFT 2806 Front Load Washer/Dryer
Check motor connector block
Check wiring
Check motor carbon brushes
Check tacho connections
Check motor
Question about Logixx WFT 2806 Front Load Washer/Dryer
...Check wiring on/to PCB and motor. Check the triac (on the PCB). C01 error code: Cause: Motor tacho fault. Action: Check motor and motor tacho wiring for problems. According to the Bosch ...
...or corrosion same with the wiring. If your motor is spinning to high-speed straightaway check that tacho connections, and if the problem persists after checking all those areas suspect the PCB or ...
Usually answered in minutes!
522 Questions
457 Questions
351 Questions
272 Questions
222 Questions