I have a 1994 ford crown victoria I tried to start it the starter turned over a couple of time then stopped like someone turned off a switch I turned on the headlights and tried to start it but ...
85 crown vic has a/c 5.0 L trying to replace belt that drives a/c and smog pump how do you get slack to put the belt on ? Inside the idler pulley mount you will note a square hole that is for using a ...
The car shakes at 35 mph then as you increase speeds the shaking disappears then starts shaking again at 63 mph....the shaking is both in the wheel and in the seat .I had the wheels balanced to no ...
...sway bar. The ends of this bar are held by 1 bolt on each side along with plastic bushings. The swaybar should be visible hanging straight across the rear differential cover. They are subject to rust ...
...when i hit any bump even small ones at any speed could be a bad brake caliper, try riding brake and hit a bump did it quit? loose exhaust system, boken strut or shock, broken sway bar stabilizer ...
...sway bar links and front whel berrings replaced. What is causing this to happen?! A defective caliper? Please help me figure this out so my vehicle is once again safe for my son to be in, as myself. ...
Do you need to remove the belt tensioner to replace the serpentine belt? NO YOU DONT HAVE TO REMOVE BELT TENSIONER.ALL YOU NEED IS A 1/2 BREAKER BAR PLACE BREAKER BAR ADAPTER END INTO 1/2 ADAPTER HOLE
2005 Suzuki forenza air bag nightmare! Airbag light on forever! Suzuki can't fix it and have no further intentions to try and fix it! Having the car crushed won't fix it! But would make hundreds of ...
How to install rear sway bar? Show rear sway bar If it is not on You Tube Video, your on your own there
Trying to remove sway bar. Bushing brackets have clip. won't come out. the clips have to be pryed off
Usually answered in minutes!
454 Questions
486 Questions
323 Questions
297 Questions
294 Questions
