Questions & Answers for: Saturn sway bar

...sway bar link and struts how hard it is to replace them , and how expensive coul be to do it by a mechanic? it all depends on what tools you have its not really that at my shop it would probable take ...

Ad

Question about 1992 SL1

1 Answer

sway bar and possibly have binding sway bar links. remove rear wheel and find link that goes from rear sway bar to strut and make sure it is able to pivot. if they are binding they make a lot of noise

Ad

...sway bar? If so, the sway bar or roll bar, or sometimes called the stabilizer bar. The sway bar has two functions. To prevent body roll or lean in a turn. It is used to control the handling of the ...

...sway bar end link noisy,or the lower control arm busgin is collapsed,if it slight noise its the sway bar link if its a loud metal to metal slap is the lower control arm bushing,,,check to see if its ...

...sway bar. The sway bar end link bushings may be worn and needs to be replaced, buy the sway bar end link kit with the urethane bushing. They last a life time and cost about $45.00 for both sides at ...

...with my sway bar making a lot of noise could it be related? The sounds are different and the sway bar noise usually occurs when going over bumps. they are not related ,you should address your ...

...the connection below the strut. What is that bar called? The sway bar is connected to the strut via the sway bar link pins which very commoonly go bad and make popping,rattling,and clunking type ...

Question about 2004 ION

1 Answer

sway bar bushing replacement Replacing Sway bar, bushings, links on m 03 Saturn Vue AWD. The Bushings I ordered seem to be too big but are the correct part from what I've checked - Moog K200333. I ...

Saturn truck rear end sways going over bumps. I have replaced the struts and sway bar links. check with dealer for recalls vue had problems with rear sway check axle bearings

I run to around 120 +or -. Ball and tierod, around 75( do not loosen, keep tightening them to get to cotter pin in). the sway bar link, I run it down till the rudder is between 1/2 and 3/4 inch thick

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1999 Saturn SL
1999 Saturn SL

1,310 Questions

1998 Saturn SL
1998 Saturn SL

953 Questions

2003 Saturn VUE
2003 Saturn VUE

1,183 Questions

2000 Saturn SL
2000 Saturn SL

963 Questions

1997 Saturn SL
1997 Saturn SL

862 Questions

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...