Questions & Answers for: Chrysler sway bar

...Do you mean the anti sway bar? It has a rack and pinion for steering which if this fell out, you have some major problems. For the anti sway bar you should just have to get new mounts and

SWAY BAR MOUNTS WORN OUT? CAN BE REPLACED WITHOUT REPLACING SWAY BARS FORNT AND REAR? yes you can just replace the mounts, and not the whole sway bar... cheap fix.. good luck keith...

...sway bar. Hold it and get someone to rock the van as hard as they can. There's and astronomically good chance you'll feel a popping in this rod. If you do, you need to replace it. It's called a sway ...

...sway bar link, they make a rattling noise. If you raise that wheel up you might also want to try and wobble the wheel to be sure it is not a tie rod end or ball joint. Typically I run into the sway ...

I need my rear watts link replaced. do i need to replace the sway bar with it. no, only if it is cracked Hi, the answer is yes, you need to replace the sway bar and with the rear watts. Best regards.

...sway bar and frame. How do i get the pa m completely off the car? Where the sway bar meets the cradle the are two bolt that hold a sway bar bushing down on both sides. The bolts have a 15mm head on ...

sway bar that is too long. In the Chrysler PT Cruiser manual I cannot find the sway bar mentioned and I don't know where it is on the vehicle. Is it possible to have a sway bar that is too long? Where

...sway bar? it does not effect the stering. But the bushings are broke off(Not driving). if you are talking about the sway bar end links. you can replace them yourself to save a few bucks. first Raise ...

...find anything loose. Any ideas? It rattles while driving and while idling Check sway bar bushings/links and sway bar bushing/body mounts, rattle mostly when going over bumps/rough spots in the

sway bar on a 2002 PT Cruiser necessary? Can it be removed without causing any future problems? Recently driving home and came across the light then-CLANK- the sway bar was dragging underneath the car