Questions & Answers for: Mitsubishi Galant starter fuse

...disconnect the starter wires to see if the fuse won't blow, then you know it's a starter problem. You also have an igntion switch that could be bad, but you need to try looking at the starter

Ad

fuse keep the car from starting? I have a new battery and a new starter. The last time the car would not start the garage mechanic said it was a fuse. Now it's happening again. fuse should be the main

Ad

...starter is bad. If there is no voltage, replace the wire. Step 3 Check the fuse in the fuse box under the hood on the left fender well. If it is good, check the relay by pulling it out and checking ...

...starter and replace the fuse and then try to start it again to see if the short is before or after that point. if it dosent blow any more than theres a short in the starter. hope this helps thank you ...

Question about 1995 Galant

1 Answer

fuse box or the battery. i had a new battery installed already and the battery technician says that my alternator is OK. i exoperience this often when i use my AC and lights before going home at night

that 30A ignition fuse is burn out...car cant start...after change new fuse,when key on..new fuse oso burn..... Sounds like you have a short somewhere. Start at the starter and work your way back.

...starter fuse. push downward on all fuses to insure a good connection.if all of the fuses are good close box up. go to battery, make certain that there is no corrosion on the cables and they are both ...

...fuse blow when key is turned to start. Your best bet is to disconnect the battery and remove the starter. Take the starter to your favorite auto parts store and have them test it. Also listen for the ...

...FUSE BOX, AND WHICH ONE IT IS. Starter relay is actually mounted on top of the starter. Have you checked to see if your "new" battery was fully charged? If it is, then i would try a new starter which ...

Question about 1996 Galant

1 Answer

starter fuse starter fuse blows when ignition is turned on. ingition switch been changed still blows fuse. starter relay been changed still blows fuse Check the starter solenoid for a short to ground.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...