...put it into gear it stalls Is the kick stand up? Some models of Motorcycles will stall if you put it in gear with the side stand down. Also, check the switch if so equipped and stand is up and it ...
...put it into gear it stalls could anyone please help me with this problam many thank:) with the engine off put it in gear pull in the clutch if you can't move the bike the clutch is dragging and ...
...stalls when you put it in drive will idol all day just find If it stalls like you pop the clutch, check the operation of the lockup torque converter. If you can give it some extra gas and keep it ...
...stalls when put into gear been doing working on my yz250f got it running again but now stalls when i shift it into gear Hi, Anonymous for more information about your question and valuable "FREE" ...
stalls when put in gear bike stalls when put in gear Does it yerk forward, if it does that it could mean that the clutch is not set correctly or it it does not release correctly Got a 1988 Nissan ...
Question about 2003 V Star 1100 Classic
Stalls when put in first gear http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf OEM parts for Yamaha http://www.starmotorcycles.com/assets/service/manuals/2000/LIT-11626-13
Question about 2003 V Star 1100 Classic
...at same time you put it in gear it don't stall and it doesn't stall all the time just occasionally You may have a problem with the idle control. What are your RPGs showing when you put it in
Question about 2003 V Star 1100 Classic
...stalls when put into gear? Possible torque converter clutch issue. Is the check engine light on? If so, have it scanned for transmission codes. If the torque converter clutch is locked up when it ...
Question about 2003 V Star 1100 Classic
put it in gear it stalls. One of the most common failures that can cause this problem that I have seen before is the Torque converter solenoid (TCC solenoid). This solenoid can stay stuck on and cause
Question about 2003 V Star 1100 Classic
...and I put it in gear it stalls, idle fluctuates, but cannot put in gear just stalls Check your intake tube for a leak , if you unplug the Maf and then start it does it stall when you put it in gear
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions