Questions & Answers for: stack washer dryer plugs

...dryer on washer using stacking kit 5303937141 So-- I have a Frigidaire washer and dryer from 2000 and stacking kit 5303937141... two brackets essentially - I'm looking for instructions to use this ...

washer/dryer I just purchased a used Kenmore stackable washer/dryer and can't get the washer to work. There is a three-pronged plug in for the dryer, which I have plugged in and the dryer works. I can

dryer works- washer doesn't Hi- Everything is plugged in to outlets. Dryer works, washer doesn't- any ideas? Check the outlet to which you connect your washer; check the plug of your washer, wires, ...

...washer with back legs sliding into the stack kit side parts. Front rail holds front dryer legs, secured by one screw on each side into stack kit side pieces after dryer is set on top of washer. the ...

washer and dryer do not work power is available to area where stacking washer and dryer are but for some reason washer and dryer are not working. dryer had clothes inside and stopped almost at end. ...

...stack with my old washer I have an Asko 7304 dryer stacked with an older Asko washer. It's dying so I want to replace it with an Asko T712. Will I have problems making this swap, will new Asko dryers ...

stack washer/dryer - the washer works fine , but the dryer won't make a sound - plug secure and breaker is fine wires tightly screwed - but no dyrer It sounds like the dryer motor please change thanks

...washer and dryer will not come on the light in the dryer isnt on and it always works when u open the door what can be wrong Check the door limit switch/s. all power goes through the limit switches ...

stack on dryer. I can't get the washer to drain and I think a kleenex got washed in a pair of pants. How do I get to the filter to see if it is plugged? Remove the lower front panel on the washer. The

...washer/dryer unit with the power going from the dryer to the washer internally(one plug). the dryer is working fine but the washer is dead. checked for loose wires but everything seemed fine. thanks ...