Questions & Answers for: Speed Queen spin counter clockwise agitate washing

...Look for a new machine. If the machine does actually agitate and spin when you move the pulley it could be as simple as a motor or timer. Please let me know what you find and we can go further. ...

...spin but not agitate the washer transmission has failed. belt is worn and slips on the pulley drive for the agitator process. Additionally, clothes are not spinning out as dry as they used to again ...

...washing. Is the belt broke? If not, will it spin it you put it in spin mode? If it spins, but not agitates, the transmission is locked up in agitation and needs replaced. This is a major

Kenmore 110.88675810 Kenmore 110.88675810 agitates doesn't spin or drain, it only agitates Most likely the timer needs relaced.

...overload protection. The Agitator is free to move. This is the same on every cycle, agitation or spin. It will intermittently work after a while but eventually the motor trips and will not make it ...

...have checked the door switch, fan belt, power supply etc. The machine is taking in water on all three cycles, drains and spin, however it will not wash (agitate) on any of the cycles. Hope this

...agitate but all other cycles spin and rinse working perfect. i took out the belt and started the cycle and the motor was moving fine. i tried taking out the belt and started the cycle again and after ...

spin counter clockwise but it locks up when I try to spin it clockwise. Any Idea's Thanks George. It has a large nut under the cap on the top of the agitator, but it will be the devil to remove due to

...spin and pumps water out. But it refuses to agitate We have replaced the timer with a brand new original timer no improvement the same happens What do you think the problem could be? water level ...

can't get nut loosened on speed queen washing machine leg to level it Most are adjusted with a 9/16 nut. Loosens counter clockwise