Questions & Answers for: Maytag spin counter clockwise agitate washing

Ad

Question about Atlantis MAV6000 Top Load Washer

2 Answers

spin, chothes wet after wash, I though it was the thrust bearing, even replaced the brake rotor and stator, the real problem was my transmition which I replaced my self. a big Job. I found out that if

Ad

Question about SAV3710AWW Washer

5 Answers

...spin at high speed but will not agitate to and fro Dear Sir/madam, First check the Lid switch, motor and belts. With all that you check, this would be the next thought, this is rightunder the tub ...

Ad

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...SPIN OR AGITATE. THE MOTOR SEEMS TO BE WORKING OK THE BELT IS FINE AND TURNING THE MACHINE WILL FILL AND DRAIN. DO THESE MACHINES HAVE A CLUTCH? OR IS THIS A TIMER PROBLEM MENTIONED BELOW Tip the ...

...spin Maytag HAV2357AWW. Disassembled agitator evrything looked ok. When I turn the belt underneath counter clockwise the moter thing turns clockwise. When I turn the belt clockwise nothing happens. I ...

...spin freely. I have a Maytag MAV7000AWW purchased in 2000. My understanding of one of the features of this machine is that the agitator reciprocates as driven by the motor (as in any normal design) ...

Question about Neptune FAV6800AW Top Load Washer

1 Answer

...Counter Clockwise the spin direction then Clockwise the wash/agitate direction. The rotational resistance should be free and very light. Post back with the results and we will go from there. Here are ...

Question about Neptune FAV6800AW Top Load Washer

3 Answers

...spin freely Clockwise and lock up in the Counter Clockwise direction. We have to nail down the tranny oil leak and clean up the roller clutches if possible or replace the Clutch. From the service ...

Question about Neptune FAV6800AW Top Load Washer

3 Answers

...spin when you turn counter clockwise then you most likely will need to change the mounting stem and bearing kits. This would be a difficult job that requires a special spanner wrench. If this turns ...

Question about Performa PAV3200

1 Answer

spin with the belt off the motor pulley is spinning but there is noise that i dont normally remember at the switch location. I spun the large pulley in the middle and it spins fine clockwise .. when i

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machine Experts

Bill Long

Level 3 Expert

606 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...