...spin counter clockwise motion. I believe everything else is working perfect. The agitator has four small teflon (I believe) plastic grips inside the upper portion called "agitator dogs". They have ...
spin the plate in bottom of the turn either way i turned it. Now it only spins it one way. Was thinking that the motor coupling was on it's way out....trying to check it...having hard time getting the
...shaft and clutch assembly wasn't assembled properly. the agitator should spin counter clockwise and clock wise(both ways). I would return this unit for an exchange before the warranty is
...spin. The motor coupling to the transmission is fine. When I turn the transmission counter clockwise it agitates but clockwise it seems to lock up. Any help would be appreciated Hello. I think that ...
counter-clockwise. If it won't turn, it's likely that something in the transmission has broken and is jamming the main drive shaft. There are a couple of plastic parts in the transmission. The Agitate
...counter-clockwise and it will come loose. It may be the bolt style and in that case just remove the bolt and lift it out. On Kenmore full size washer`s built by whirlpool there are one 2 types, ones ...
...counter-clockwise and it will come loose. It may be the bolt style and in that case just remove the bolt and lift it out. On Whirlpool washer (this is who built your Kenmore) throughout the years ...
Question about 24902 Top Load Washer
...spin basket, but can't get the 7/16 nut off to remove the agitator. I have tried clockwise and counter.Any suggestions? If you're using a ratchet to remove the bolt you'll typically need to use a ...
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions
