Questions & Answers for: Nikon speed of light

light source and film speed. (iso ) the faster the film the less you have to use flash, the lower the f-stop the less depth of field you have, the kind of flash is important, most flash units are good

...light at the shutter speed set, then it won't expose. Keep in mind this isn't just for exposures that are close to being right, only when the shutter speed is so fast or slow that the exposure isn't ...

speed light is completely dead, have replaced Nikon Macro speed light SB29S is completely dead, have replaced batteries and checked all contact for continuity Contacts are broken, you will have to ...

...a properly exposed photo at that shutter speed. There may be too little light (as in your case) or too much light. You have to use a shutter speed appropriate for the subject and the light

...speed controls how long that light hits the sensor. The two of them have to be adjusted properly to suit the amount of light hitting the subject. If the lens doesn't admit enough light and/or the ...

...speed will allow more light to hit the canera's sensor and create a brighter picture. Unfortunately with a longer shutter speed, you will probably need a tripod because the photo will come out ...

...speed and you should get usable and properly exposed pictures. In addition, the flash TTL setting allows the flash to match the light output to the shooting situation, reducing light output for shots ...

...speed light is not up when it is, flash won't work When I try to use the speed light I get a red message across the screen telling me the speed light is not in the up position even though it is. ...

speed is So fast the mirror blocks the sensor when the light hits it. You Can increase you aperture to a height number (f11 for example) and keep your shutter speed below 1/200 to avoid the issue. The

...speed provided by the light meter into the camera. No light meter either? "Guesstimate" a shutter speed for the first exposure; and then adjust your shutter speed up or down as needed and determined ...