Questions & Answers for: use a socket wrench

...socket wrench and i mean big wrench the length of arm bigger the wrench less strain on arm to pulley cause it might seem stuck but if apply opposite preasure to the tensioner with big socket wrench ...

...wrench wont engage to the socket. I have the same problem, brand new impact wrench, brand new impact sockets, but can't get a socket onto the gun. Leaned on it with all my weight, wiggled, nothing. ...

...socket wrench on it; by 'unscrewing' the socket wrench, you should be able to release the tension on the belt - it will take some pressure to release. Once you have tested this, you can pull onthe ...

8mm allen. A bit of JB Weld or a spot weld will keep the wrench piece in the socket, or let the allen 'float' in the socket if you do not have a spare 1/4 inch socket and will need it for other things

Why doesn't my craftsman air sockets not fit craftsman impact wrench tight?imapact has no pins for sockets to stay on?is there something I need to impact for them to stay on? Make sure the expansion ...

...socket wrench. 2 Locate thealternator on the front of the engine. The engine is side-mounted so thealternator will be pointing towards the passenger's side fender on the top leftcorner. Then locate ...

...socket on a black & Decker Bulldawg impact wrench Black & Decker Bulldawg 6513-09 1/2" 120v 7.5A typ 1 impact wrench metal ring spring broke. How to install a new one (I have a spare) so it can ...

socket on but nut is too weak to spin off oil filter,what wrench does Harley Davidson use? Its probably a K and N oil filter. That's a good oil filter. Try metric sockets on it. OEM Harley filters don

socket/wrench that is the same size as the outer width of the bearing or one you can tap on the outside bit by bit, using the soft hammer or a metal hammer and a bit of wood ( so you do not damage the

...14-17mm wrenches, and possibly even a socket wrench with 14-17mm sockets and an socket extension to reach in to any foot pegs attached, and sometimes also the sockets will need to be deep ones also