shipping bolts need to be installed: two longer ones on the bottom and two shorter ones on the top. Each shipping bolt consists of a metal screw inside a plastic cylinder which fits between the washer
Shipping bolts for Maytag Neptune Where can I get the bolts to secure the drum for shipping? We're moving from one house to another. The installer did not leave the bolts after installation. Maytag ...
Question about Neptune MAH5500B Front Load Washer
...shipping bolts? I have a WCVH6800JWW and I want to move it from the upstairs laundry room into the downstairs laundry room but was warned not to do this without the shipping bolts and that the ...
Question about Neptune MAH5500B Front Load Washer
...shipping bolts for LG tromm front load wsher Need shipping bolts for the LG Front Loading washer ... original bolts disappeared from yesterday and we're moving now. Need a FAST solution today... do ...
...shipping bolts. all washers ever made regardless of front or top load need shipping support when shipped be it shipping bolts or other means of synching the tub down so it doesnt become damaged by ...
...shipping bolts removed? All four (4) shipping bolts and the plastic spacers must be removed from the rear of the washer before you operate it. Each unit is shipped from the factory with four bolts, ...
Question about WF431ABPXAA Washer
...shipping bolts ( from korea to USA),would the washer be OK or there could be possible damage to the drum/washer in anyway? A washer was shipped to my house ( first from Korea to USA!) and it only has ...
...shipping bolts up close What kind the washer is? If the front load, there are 4 shipping bolt at the back to keep the drum not moving when it comes out of factory. If the top load, the shipping bolts ...
Question about WF431ABPXAA Washer
...shipping bolts been removed? This error code indicates that the motor is having difficulty turning. All four (4) shipping bolts and the plastic spacers must be removed from the rear of the washer ...
...shipping bolts for Samsung dryer dv42h5200gp/a3 Dryers don't need Shipping Bolts, only Washing Machines. The drum is supported at the back bearing and at the front by the drum rollers. A washing ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions