1990 vulcan 750 throttle i bought a vulcan with rebuilt carbs. the throttle works fine the carbs linkage snaps back good until i hook the throttle cables up. then the throttle works hard and stays ...
i have a 1987 kawasaki concours 1000cc that was givin to me and had previously ran before being parked 2 years ago. i put in a new battery and drained the old fuel and started it and it wouldnt even ...
start up Turn key, press button, pray. Seriously, what symptoms are you having? I assume the bike isn't starting. Does it crank? If so, does it fire at all? Starts then stalls? Smokes? Makes weird ...
when i pull in the clutch and shift into gear my bike jumps and dies. it doesnt seem like the clutch is working That definitely sounds like the clutch is shot,like it's not even there.Inspect both ...
what is the optimal speed to shift gears? http://www.2wheelsindia.com/2007/09/bajaj-pulsar-180-ug-iii-owners-review.html see if this helps
...when I pulled in clutch I checked oil it was full started bike drove down road got were didn't want shift rite oil light still on start sqelling from bottom part of motor so when I pulled cluht in ...
Question about 1994 VN 750 Vulcan
how do u fix a stripped out shifting lever on a 94 750 vulcan you can jb weld it or drill hole threw lever and shaft and put bolt and through it.
high speed, gear, partially stalling I have an intermittent problem from what I can tell. When riding and I'm shifting into higher gears it works fine up to 3rd and then I noticed in 4th it seems like
Question about 1993 VN 750 Vulcan
The rpms on a 1993 kawasaki vulcan 750 will not go down fast enough in between shifts mixer to rich
Usually answered in minutes!
29 Questions
27 Questions
24 Questions
15 Questions
16 Questions