sable and i need to change the oil pump i am working on the same thing on somebody else's car and trust me it is alot of work. you have to remove all the pulleys and accessories, the valve covers, oil
...Sable 3.0L V6 No oil pressure (light on) , camshaft position sensor error, but engine runs fine. Is sensor drive gear broken? Yes, the sensor is in small housing the goes in the hole where the ...
...Sable 2003,OV V6 usually if the magnet in the sensor comes out it destroys the cam position shaft,(it should have a half moon shape when u remove the sensor from the cam pos/oil pump drive. if the ...
...sable front of engine right by the oil filter i know where it is , i had to do some open heart surgery on my car but i found the little thing ,,,,, it is under your power steering pump . take off the ...
Oil light on, oil level is full, rattle sound coming from engine. Sounds like a oil pump going bad.....Rattling could be from pump not pushing oil to lube engine.
...sable wagon? 20/50 is fine unless you in a winter in alaska ,use cheapest oil you can buy an and change it every 6000miles with a oil filter every third oil change ,Do not use long life oils with ...
...sable, the engine oil light flashes at a idle but the oil is full. Any thoughts on what it could be? Your oil press swich is going bad or you have sludge or dirt blocking pickup screen in oil pan or ...
Question about 1996 Sable
...Sable I changed the Sending unit but that didn't help so I was told that it may be the oil pump I pulled the oil pan off, and removed the oil pump. I tore the pump apart but I could not see ...
Question about 1997 Sable
...sable 3.0 engine think its weak as I hear valves chatter and changed oil filter it was only half full of oil is this normal Half full is not normal. You may have leak or burn. Clatter is usually the ...
wheres the oil pump on a 1997 mercury sable 3.0 engine Inside the oil pan
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions