Questions & Answers for: how to replace a strut mount

...reason if i were on that job i would have replaced both gas struts at the same time.... not much structure to the top strut mounts see pictures in link Strut Mount Early Small Chassis Audi Density ...

Ad

Question about 1993 Camry V6

1 Answer

...a good idea to replace the seats/bearings when you do the struts - having to replace them afer is a pain. If you mean should you replace the strut lower bushings, yes, definitely. Hope this helps

Ad

You'll be better off to get the whole strut, instead of the replacement cartridge, it's often hard to remove the old one from the old housing. Don't forget to replace the strut mount and strut bushing

Question about 1997 Camry

1 Answer

repair strut mounts I had my left and right strut mounts replaced 2,000 miles back and now a different mechanic states I need my upper strut tops replaced. Is this the same thing? Yes but if its ...

Question about 2001 Jetta TDI

1 Answer

...the spring before seperating the strut from the strut mount and spring. You may want to replace the strut mount also. MAKE SURE THE SPRING IS COMPRESSED ENOUGH BEFORE REMOVING THE TOP STRUT

...The clunk sound is louder coming from the top strut mount area... Can you help? either the strut is not tight or the strut mount it bad. did you change the strut mount when you changed the

Question about 1999 300M

1 Answer

...REPLACE REAR SHOCKS ) REMOVE REAR WHEELS, REMOVE REAR PACKAGE TRIM. REMOVE SPEED SENSOR HARNESS, REMOVE TOP STRUT NUTS,THE SUSPENSION WILL DROP WHEN THE WEIGHT LIFTS OFF THE WHEELS. REMOVE BOTTOM ...

...Strut Mount for 2001 Chrysler 300M how do I replace rear struts on 99 300M, specifically how www.justanswer.com/car/1j2x3-replace-rear-struts-99-300m... ... how do I replace rear struts on ... Find ...

...to be riding on springs is there replacement top mounts available or do I fabricate mi own cant see what they look like when replacing the struts it should a new bolt,and replace the strut mount ...

Question about 1999 300M

1 Answer

replace the upper strut mounting plate with a new one, I have tried to use a impact gun with no use. There are two options to fix this strut mounting. .1st if u can do to get visegrip to hold it under

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...