Questions & Answers for: replace rear wheel bearing 2003

...replace the front wheel bearings on a 2003 ford focus. remove the hub and spinle ,tie rod end ,axle nut.ball joint,and seperate from strut and then have new bearing pressed in...or rent a bearing ...

...is rubbing up against tire but can;t see anything, and have heard it when turning left and going straight. like a grinding noise, it's a 2003 ford expedition I would check the wheel bearings

What, if any special tools are needed to replace the rear wheel hub assy? 2003 Ford Expedition, 4WD nothing but ordinary hand tools are needed.

...a part recall? It looks like others have had this issue what do you know about this? front? rear? I did not find a TSB or recall. Biggest issue with wheel bearings is corrosion due to water

...wheel hub bearing - now abs light turns on and off - does this have anything to do with the repair? yes!!Your vehicles wheel bearing each have an ABS speed sensor. Check connections and if the sensor ...

...rear hub/bearing assembly on 2003 taurus with drum brakes/abs The wheel bearings in a Ford Taurus are located in the hub/bearing assembly. Replacing the hub/bearing assembly is a straightforward ...

...rear wheel bearings on my 1999 Ford Expedition and how do i know what pulley to rent/buy? The 1999 Ford Expedition is built on an F150 platform. The Expedition uses a 9.75-inch rear axle. The axles ...

have the part and the box said torque to OE standards. What is OE and what is the torque spec for the wheel hub bearing? you should beable to get it from the place you bought part from It's 75 ft. Lbs

How do I remove the rear wheel bearing assembly from a 2003 ford expedition? I believe you just in bolt and pull very hard

replaced rear wheel bearing but now it makes a scratch noise Check the backing plate for the brakes. Really not hard to knock them out of place. Use a screwdriver to bend it away from the rotor.