Questions & Answers for: Chrysler Sebring replace rear shocks

front end sqeek and grinding sound .goes away when i jack up the car check everything looks fine and tight but comes back in a few days thought it might be the shocks? shocks wouldntt grind, grinding ...

...rear shocks poped through the shock tower on my 2001 sebring. What needs to be replaced? It sounds like what you described, the shock tower mounts needs to be replaced. I believe you can buy that ...

...they can't find where the sound is coming from or a possible solution. Hub assemblies have been replaced - brakes checked - struts checked .... no answers. Anyone have any ideas?? Check the front ...

How do you replace the driver side strut and cv joint on a 2002 Chrysler Sebring rent a shock compressor to compress shock then you release the top bolt of shock it will snap like 80 mph be careful ...

clanking noise rear driver side. Sounds like a loose shock? Struts replaced and everyting feels tight. Still get metal to metal noise over small bumps or dips? lower track control arm or the antiroll ...

...noise in the front drivers side no other problem only the annoying noise had a tie rod bracket replaced one mechanic said that was the problem but NO still noise Well it could be any suspension ...

...cost to have this replaced, and should I go ahead and have the front main replaced? It is a big job ,and will cost some money. The only way to replace the rear main seal is to remove the ...

...rear hop on wet pavement but it is front wheel drive you have bad shocks-and- or tires that need replaced-while car is setting try to push down on the rear and see if it goes down easily and then ...

Why does rear wheel squeak when not braking when driving slowly Rear passenger They have pad sensors that squeak when rolling, replace rear pads

Tips to break loose and remove the 2 bolts holding the rear seat back 04 Chrysler Sebring Convertible. Trying to get to the pump for convertible top. Removed back seat bottom. Located the two bolts to